trying to setup a gateway on a old p5n-e sli but the on broad nic isn't showing up the pci card shows up but I need both to use it as a gaetway. I think the on broad is NVIDIA Dual Gigabit MAC with external Marvell PHY
In IP Settings
Share this post:
Accepted Answer
extract from forcedeth.c
So looks like the kmod-forcedeth driver is required...
Nick probably has the driver on his web-site - but it is also here at...
kmod-forcedeth-0.64-3.el7_5.elrepo
for ClearOS 7.5 only (built with kernel 3.10.0-862.11.6.v7.x86_64)
www.sraellis.tk
... snipped
{ /* MCP51 Ethernet Controller */
PCI_DEVICE(0x10DE, 0x0269),
.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1|DEV_NEED_LOW_POWER_FIX,
},
... snaipped
So looks like the kmod-forcedeth driver is required...
Nick probably has the driver on his web-site - but it is also here at...
kmod-forcedeth-0.64-3.el7_5.elrepo
for ClearOS 7.5 only (built with kernel 3.10.0-862.11.6.v7.x86_64)
www.sraellis.tk
Responses (6)
-
Accepted Answer
-
Accepted Answer
Bridge: Nvidia corp MCP51 Ethernet controller (rev a3)
Subsystem:ASUSTek Computer Inc. Device 8221
VGA Compatible Controller: Nvidia GF100 [GeForce 480] (rev a3)
Ethernet controller: realtek Semiconductor co ., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet controller (rev 06)
Subsystem:Tp-link Technologies Co ., Ltd. TG-3468 Gigabit PCI Express Network Adapter
Kernel driver in use r8169
kernel modules r8169 -
Accepted Answer
Sorry, but I don't recognise the first controller properly. Please can you do an extended:
I am only after the output for the "Nvidia corp MCP51 Ethernet controller" section.lspci -knn
For the other NIC, it will work better with alternative drivers:
Then reboot.yum install kmod-r816*
-
Accepted Answer
-
Accepted Answer
Yes, that is the one. Also confirmed by looking it up on ElRepo's site. Please make sure your system in on ClearOS 7.5 to use it. Also, the way things seem to be going with EL7, every kernel coming out with a point release of the OS requires an updated driver. Keep an eye out on my site where I try to maintain the up-to-date ones.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »