Installed V6.6.1 from DVD and upon rebooting am able to log in and arrive at a # prompt.
Problem is I am not getting an IP address from my router DHCP server so I am unable to access the web gui.
From the # prompt, the ifconfig command shows no ip4 address.
If I boot Mint 17 from a usb stick everything works fine.
Any ideas what's up with clearos?
Intel d945gnt motherboard
on-board nic
Celeron processor
500mb ram
Problem is I am not getting an IP address from my router DHCP server so I am unable to access the web gui.
From the # prompt, the ifconfig command shows no ip4 address.
If I boot Mint 17 from a usb stick everything works fine.
Any ideas what's up with clearos?
Intel d945gnt motherboard
on-board nic
Celeron processor
500mb ram
In IP Settings
Share this post:
Responses (2)
-
Accepted Answer
Doink.
Well I thought I would try a re-install without the 2nd NIC in case that was screwing things up. Early indications were positive, the on-board NIC LEDs blinked away indicating some action so I was hopeful that things would turn out better. Sadly this optimism proved illusory and I ended up with an identically non-responsive network.
Still open to ideas though before I ditch ClearOS and try an alternative distro... -
Accepted Answer
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »