Still no luck on getting Side A & B to completely ping each other. Played around with routes but still am only able to ping the other network from my router. Can ping other devices from my router but not able to ping a server at side B with my surface. The lans do not overlap Side A - 192.168.2.x Side B - 192.168.1.x

Output of the command route below, the only thing I can think of is that routes are wrong somehow even though it allows me to connect across the tunnel.

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default c-73-35-184-1.h 0.0.0.0 UG 0 0 0 eno50336512
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun2
10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun2
10.8.10.0 10.8.10.2 255.255.255.0 UG 0 0 0 tun1
10.8.10.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun1
10.8.222.41 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
wan.ip.address 0.0.0.0 255.255.252.0 U 0 0 0 eno50336512
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eno33557248