I want to access Plex media over DLNA protocol. I enabled the DLNA feature in Plex server, which is installed on a clearOS 7.5 server. I tried to access the DLNA server using macOS VLC and a set-top-box, but neither can discover it. (Other DLNA servers in the same network are discoverable)
I thought MiniUPnP app might help. I installed the app from the Marketplace, but it couldn't start. The log is in the attachment.
My server is in Standalone mode. "enp0s31f6" interface is the one connected to the network. "br0" is an old interface that was removed from the server long time ago!
I thought MiniUPnP app might help. I installed the app from the Marketplace, but it couldn't start. The log is in the attachment.
My server is in Standalone mode. "enp0s31f6" interface is the one connected to the network. "br0" is an old interface that was removed from the server long time ago!
Nov 26 21:51:34 gateway yum[31951]: Installed: miniupnpd-2.1-8.v7.x86_64
Nov 26 21:51:34 gateway systemd: Reloading.
Nov 26 21:51:34 gateway systemd: [/etc/systemd/system/saned.service:6] Executable path is not absolute, ignoring: killall saned
Nov 26 21:51:34 gateway systemd: asterisk.service: Supervising process 3195 which is not our child. We'll most likely not notice when it exits.
Nov 26 21:51:34 gateway systemd: Starting UPnP device server....
Nov 26 21:51:34 gateway iptables_init.sh: Nat table dirty; Cleaning...
Nov 26 21:51:34 gateway iptables_init.sh: Filter table dirty; Cleaning...
Nov 26 21:51:34 gateway miniupnp-options: WAN=-i enp0s31f6 LAN=-a br0 Options=
Nov 26 21:51:34 gateway systemd: miniupnpd.service: control process exited, code=exited status=1
Nov 26 21:51:34 gateway miniupnpd: Error parsing address/mask (or interface name) : br0
Nov 26 21:51:34 gateway miniupnpd: can't parse "br0" as a valid LAN address or interface name
Nov 26 21:51:34 gateway miniupnpd: Usage:
Nov 26 21:51:34 gateway miniupnpd: /usr/sbin/miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
Nov 26 21:51:34 gateway miniupnpd: [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
Nov 26 21:51:34 gateway miniupnpd: [-u uuid] [-s serial] [-m model_number]
Nov 26 21:51:34 gateway miniupnpd: [-t notify_interval] [-P pid_filename]
Nov 26 21:51:34 gateway miniupnpd: [-B down up] [-w url] [-r clean_ruleset_interval]
Nov 26 21:51:34 gateway miniupnpd: [-A "permission rule"] [-b BOOTID]
Nov 26 21:51:34 gateway miniupnpd: Notes:
Nov 26 21:51:34 gateway miniupnpd: There can be one or several listening_ips.
Nov 26 21:51:34 gateway miniupnpd: Notify interval is in seconds. Default is 30 seconds.
Nov 26 21:51:34 gateway miniupnpd: Default pid file is '/var/run/miniupnpd.pid'.
Nov 26 21:51:34 gateway miniupnpd: Default config file is '/etc/miniupnpd.conf'.
Nov 26 21:51:34 gateway miniupnpd: With -d miniupnpd will run as a standard program.
Nov 26 21:51:34 gateway miniupnpd: -S sets "secure" mode : clients can only add mappings to their own ip
Nov 26 21:51:34 gateway miniupnpd: -U causes miniupnpd to report system uptime instead of daemon uptime.
Nov 26 21:51:34 gateway miniupnpd: -N enables NAT-PMP functionality.
Nov 26 21:51:34 gateway miniupnpd: -B sets bitrates reported by daemon in bits per second.
Nov 26 21:51:34 gateway miniupnpd: -w sets the presentation url. Default is http address on port 80
Nov 26 21:51:34 gateway miniupnpd: -A use following syntax for permission rules :
Nov 26 21:51:34 gateway miniupnpd: (allow|deny) (external port range) ip/mask (internal port range)
Nov 26 21:51:34 gateway miniupnpd: examples :
Nov 26 21:51:34 gateway miniupnpd: "allow 1024-65535 192.168.1.0/24 1024-65535"
Nov 26 21:51:34 gateway miniupnpd: "deny 0-65535 0.0.0.0/0 0-65535"
Nov 26 21:51:34 gateway miniupnpd: -b sets the value of BOOTID.UPNP.ORG SSDP header
Nov 26 21:51:34 gateway miniupnpd: -h prints this help and quits.
Nov 26 21:51:34 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:34 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:34 gateway systemd: miniupnpd.service failed.
Nov 26 21:51:34 gateway yum[31951]: Installed: 1:app-miniupnpd-core-1.0.0-2.v7.noarch
Nov 26 21:51:34 gateway yum[31951]: Installed: 1:app-miniupnpd-1.0.0-2.v7.noarch
Nov 26 21:51:35 gateway systemd: miniupnpd.service holdoff time over, scheduling restart.
Nov 26 21:51:35 gateway systemd: Starting UPnP device server....
Nov 26 21:51:35 gateway iptables_init.sh: Nat table dirty; Cleaning...
Nov 26 21:51:35 gateway iptables_init.sh: Filter table dirty; Cleaning...
Nov 26 21:51:35 gateway miniupnp-options: WAN=-i enp0s31f6 LAN=-a br0 Options=
Nov 26 21:51:35 gateway miniupnpd: Error parsing address/mask (or interface name) : br0
Nov 26 21:51:35 gateway miniupnpd: can't parse "br0" as a valid LAN address or interface name
Nov 26 21:51:35 gateway miniupnpd: Usage:
Nov 26 21:51:35 gateway miniupnpd: /usr/sbin/miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
Nov 26 21:51:35 gateway miniupnpd: [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
Nov 26 21:51:35 gateway miniupnpd: [-u uuid] [-s serial] [-m model_number]
Nov 26 21:51:35 gateway miniupnpd: [-t notify_interval] [-P pid_filename]
Nov 26 21:51:35 gateway miniupnpd: [-B down up] [-w url] [-r clean_ruleset_interval]
Nov 26 21:51:35 gateway miniupnpd: [-A "permission rule"] [-b BOOTID]
Nov 26 21:51:35 gateway miniupnpd: Notes:
Nov 26 21:51:35 gateway miniupnpd: There can be one or several listening_ips.
Nov 26 21:51:35 gateway miniupnpd: Notify interval is in seconds. Default is 30 seconds.
Nov 26 21:51:35 gateway miniupnpd: Default pid file is '/var/run/miniupnpd.pid'.
Nov 26 21:51:35 gateway miniupnpd: Default config file is '/etc/miniupnpd.conf'.
Nov 26 21:51:35 gateway miniupnpd: With -d miniupnpd will run as a standard program.
Nov 26 21:51:35 gateway miniupnpd: -S sets "secure" mode : clients can only add mappings to their own ip
Nov 26 21:51:35 gateway miniupnpd: -U causes miniupnpd to report system uptime instead of daemon uptime.
Nov 26 21:51:35 gateway miniupnpd: -N enables NAT-PMP functionality.
Nov 26 21:51:35 gateway miniupnpd: -B sets bitrates reported by daemon in bits per second.
Nov 26 21:51:35 gateway miniupnpd: -w sets the presentation url. Default is http address on port 80
Nov 26 21:51:35 gateway miniupnpd: -A use following syntax for permission rules :
Nov 26 21:51:35 gateway miniupnpd: (allow|deny) (external port range) ip/mask (internal port range)
Nov 26 21:51:35 gateway miniupnpd: examples :
Nov 26 21:51:35 gateway miniupnpd: "allow 1024-65535 192.168.1.0/24 1024-65535"
Nov 26 21:51:35 gateway miniupnpd: "deny 0-65535 0.0.0.0/0 0-65535"
Nov 26 21:51:35 gateway miniupnpd: -b sets the value of BOOTID.UPNP.ORG SSDP header
Nov 26 21:51:35 gateway miniupnpd: -h prints this help and quits.
Nov 26 21:51:35 gateway systemd: miniupnpd.service: control process exited, code=exited status=1
Nov 26 21:51:35 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:35 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:35 gateway systemd: miniupnpd.service failed.
Nov 26 21:51:36 gateway systemd: miniupnpd.service holdoff time over, scheduling restart.
Nov 26 21:51:36 gateway systemd: Starting UPnP device server....
Nov 26 21:51:36 gateway iptables_init.sh: Nat table dirty; Cleaning...
Nov 26 21:51:36 gateway iptables_init.sh: Filter table dirty; Cleaning...
Nov 26 21:51:36 gateway miniupnp-options: WAN=-i enp0s31f6 LAN=-a br0 Options=
Nov 26 21:51:36 gateway miniupnpd: Error parsing address/mask (or interface name) : br0
Nov 26 21:51:36 gateway miniupnpd: can't parse "br0" as a valid LAN address or interface name
Nov 26 21:51:36 gateway miniupnpd: Usage:
Nov 26 21:51:36 gateway miniupnpd: /usr/sbin/miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
Nov 26 21:51:36 gateway miniupnpd: [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
Nov 26 21:51:36 gateway miniupnpd: [-u uuid] [-s serial] [-m model_number]
Nov 26 21:51:36 gateway miniupnpd: [-t notify_interval] [-P pid_filename]
Nov 26 21:51:36 gateway miniupnpd: [-B down up] [-w url] [-r clean_ruleset_interval]
Nov 26 21:51:36 gateway miniupnpd: [-A "permission rule"] [-b BOOTID]
Nov 26 21:51:36 gateway miniupnpd: Notes:
Nov 26 21:51:36 gateway miniupnpd: There can be one or several listening_ips.
Nov 26 21:51:36 gateway miniupnpd: Notify interval is in seconds. Default is 30 seconds.
Nov 26 21:51:36 gateway miniupnpd: Default pid file is '/var/run/miniupnpd.pid'.
Nov 26 21:51:36 gateway miniupnpd: Default config file is '/etc/miniupnpd.conf'.
Nov 26 21:51:36 gateway miniupnpd: With -d miniupnpd will run as a standard program.
Nov 26 21:51:36 gateway miniupnpd: -S sets "secure" mode : clients can only add mappings to their own ip
Nov 26 21:51:36 gateway miniupnpd: -U causes miniupnpd to report system uptime instead of daemon uptime.
Nov 26 21:51:36 gateway miniupnpd: -N enables NAT-PMP functionality.
Nov 26 21:51:36 gateway miniupnpd: -B sets bitrates reported by daemon in bits per second.
Nov 26 21:51:36 gateway miniupnpd: -w sets the presentation url. Default is http address on port 80
Nov 26 21:51:36 gateway miniupnpd: -A use following syntax for permission rules :
Nov 26 21:51:36 gateway miniupnpd: (allow|deny) (external port range) ip/mask (internal port range)
Nov 26 21:51:36 gateway miniupnpd: examples :
Nov 26 21:51:36 gateway miniupnpd: "allow 1024-65535 192.168.1.0/24 1024-65535"
Nov 26 21:51:36 gateway miniupnpd: "deny 0-65535 0.0.0.0/0 0-65535"
Nov 26 21:51:36 gateway miniupnpd: -b sets the value of BOOTID.UPNP.ORG SSDP header
Nov 26 21:51:36 gateway miniupnpd: -h prints this help and quits.
Nov 26 21:51:36 gateway systemd: miniupnpd.service: control process exited, code=exited status=1
Nov 26 21:51:36 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:36 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:36 gateway systemd: miniupnpd.service failed.
Nov 26 21:51:37 gateway systemd: miniupnpd.service holdoff time over, scheduling restart.
Nov 26 21:51:37 gateway systemd: Starting UPnP device server....
Nov 26 21:51:37 gateway iptables_init.sh: Nat table dirty; Cleaning...
Nov 26 21:51:37 gateway iptables_init.sh: Filter table dirty; Cleaning...
Nov 26 21:51:38 gateway miniupnp-options: WAN=-i enp0s31f6 LAN=-a br0 Options=
Nov 26 21:51:38 gateway miniupnpd: Error parsing address/mask (or interface name) : br0
Nov 26 21:51:38 gateway miniupnpd: can't parse "br0" as a valid LAN address or interface name
Nov 26 21:51:38 gateway miniupnpd: Usage:
Nov 26 21:51:38 gateway miniupnpd: /usr/sbin/miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
Nov 26 21:51:38 gateway miniupnpd: [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
Nov 26 21:51:38 gateway miniupnpd: [-u uuid] [-s serial] [-m model_number]
Nov 26 21:51:38 gateway miniupnpd: [-t notify_interval] [-P pid_filename]
Nov 26 21:51:38 gateway miniupnpd: [-B down up] [-w url] [-r clean_ruleset_interval]
Nov 26 21:51:38 gateway miniupnpd: [-A "permission rule"] [-b BOOTID]
Nov 26 21:51:38 gateway miniupnpd: Notes:
Nov 26 21:51:38 gateway miniupnpd: There can be one or several listening_ips.
Nov 26 21:51:38 gateway miniupnpd: Notify interval is in seconds. Default is 30 seconds.
Nov 26 21:51:38 gateway miniupnpd: Default pid file is '/var/run/miniupnpd.pid'.
Nov 26 21:51:38 gateway miniupnpd: Default config file is '/etc/miniupnpd.conf'.
Nov 26 21:51:38 gateway miniupnpd: With -d miniupnpd will run as a standard program.
Nov 26 21:51:38 gateway miniupnpd: -S sets "secure" mode : clients can only add mappings to their own ip
Nov 26 21:51:38 gateway miniupnpd: -U causes miniupnpd to report system uptime instead of daemon uptime.
Nov 26 21:51:38 gateway miniupnpd: -N enables NAT-PMP functionality.
Nov 26 21:51:38 gateway miniupnpd: -B sets bitrates reported by daemon in bits per second.
Nov 26 21:51:38 gateway miniupnpd: -w sets the presentation url. Default is http address on port 80
Nov 26 21:51:38 gateway miniupnpd: -A use following syntax for permission rules :
Nov 26 21:51:38 gateway miniupnpd: (allow|deny) (external port range) ip/mask (internal port range)
Nov 26 21:51:38 gateway miniupnpd: examples :
Nov 26 21:51:38 gateway miniupnpd: "allow 1024-65535 192.168.1.0/24 1024-65535"
Nov 26 21:51:38 gateway miniupnpd: "deny 0-65535 0.0.0.0/0 0-65535"
Nov 26 21:51:38 gateway miniupnpd: -b sets the value of BOOTID.UPNP.ORG SSDP header
Nov 26 21:51:38 gateway miniupnpd: -h prints this help and quits.
Nov 26 21:51:38 gateway systemd: miniupnpd.service: control process exited, code=exited status=1
Nov 26 21:51:38 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:38 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:38 gateway systemd: miniupnpd.service failed.
Nov 26 21:51:39 gateway systemd: miniupnpd.service holdoff time over, scheduling restart.
Nov 26 21:51:39 gateway systemd: Starting UPnP device server....
Nov 26 21:51:39 gateway iptables_init.sh: Nat table dirty; Cleaning...
Nov 26 21:51:39 gateway iptables_init.sh: Filter table dirty; Cleaning...
Nov 26 21:51:39 gateway miniupnp-options: WAN=-i enp0s31f6 LAN=-a br0 Options=
Nov 26 21:51:39 gateway systemd: miniupnpd.service: control process exited, code=exited status=1
Nov 26 21:51:39 gateway miniupnpd: Error parsing address/mask (or interface name) : br0
Nov 26 21:51:39 gateway miniupnpd: can't parse "br0" as a valid LAN address or interface name
Nov 26 21:51:39 gateway miniupnpd: Usage:
Nov 26 21:51:39 gateway miniupnpd: /usr/sbin/miniupnpd [-f config_file] [-i ext_ifname] [-o ext_ip]
Nov 26 21:51:39 gateway miniupnpd: [-a listening_ip] [-p port] [-d] [-U] [-S] [-N]
Nov 26 21:51:39 gateway miniupnpd: [-u uuid] [-s serial] [-m model_number]
Nov 26 21:51:39 gateway miniupnpd: [-t notify_interval] [-P pid_filename]
Nov 26 21:51:39 gateway miniupnpd: [-B down up] [-w url] [-r clean_ruleset_interval]
Nov 26 21:51:39 gateway miniupnpd: [-A "permission rule"] [-b BOOTID]
Nov 26 21:51:39 gateway miniupnpd: Notes:
Nov 26 21:51:39 gateway miniupnpd: There can be one or several listening_ips.
Nov 26 21:51:39 gateway miniupnpd: Notify interval is in seconds. Default is 30 seconds.
Nov 26 21:51:39 gateway miniupnpd: Default pid file is '/var/run/miniupnpd.pid'.
Nov 26 21:51:39 gateway miniupnpd: Default config file is '/etc/miniupnpd.conf'.
Nov 26 21:51:39 gateway miniupnpd: With -d miniupnpd will run as a standard program.
Nov 26 21:51:39 gateway miniupnpd: -S sets "secure" mode : clients can only add mappings to their own ip
Nov 26 21:51:39 gateway miniupnpd: -U causes miniupnpd to report system uptime instead of daemon uptime.
Nov 26 21:51:39 gateway miniupnpd: -N enables NAT-PMP functionality.
Nov 26 21:51:39 gateway miniupnpd: -B sets bitrates reported by daemon in bits per second.
Nov 26 21:51:39 gateway miniupnpd: -w sets the presentation url. Default is http address on port 80
Nov 26 21:51:39 gateway miniupnpd: -A use following syntax for permission rules :
Nov 26 21:51:39 gateway miniupnpd: (allow|deny) (external port range) ip/mask (internal port range)
Nov 26 21:51:39 gateway miniupnpd: examples :
Nov 26 21:51:39 gateway miniupnpd: "allow 1024-65535 192.168.1.0/24 1024-65535"
Nov 26 21:51:39 gateway miniupnpd: "deny 0-65535 0.0.0.0/0 0-65535"
Nov 26 21:51:39 gateway miniupnpd: -b sets the value of BOOTID.UPNP.ORG SSDP header
Nov 26 21:51:39 gateway miniupnpd: -h prints this help and quits.
Nov 26 21:51:39 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:39 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:39 gateway systemd: miniupnpd.service failed.
Nov 26 21:51:40 gateway systemd: miniupnpd.service holdoff time over, scheduling restart.
Nov 26 21:51:40 gateway systemd: start request repeated too quickly for miniupnpd.service
Nov 26 21:51:40 gateway systemd: Failed to start UPnP device server..
Nov 26 21:51:40 gateway systemd: Unit miniupnpd.service entered failed state.
Nov 26 21:51:40 gateway systemd: miniupnpd.service failed.
In UPnP
Share this post:
Responses (2)
-
Accepted Answer
Thank you Nick.
I removed the miniupnpd app. The "br0" turned to be a leftover of a bridge a created then removed. Its name remained in /etc/clearos/network.conf for an unknown reason!
I still cannot access the DLNA server. I'm reading about the DLNA protocol in order to know what's going on, but still can't figure it out :/ -
Accepted Answer
Hi Mansoor,
Miniupnpd is a program to automatically set up port forwarding from the machine's LAN to its WAN. If you are in standalone mode it will do nothing and is best removed. I will see if I can trap the error you are seeing - presumably an interface with no IP, but It won't happen immediately.
For br0, is there a file /etc/sysconfig/network-scripts/ifcfg-br0 left lying around? If so, please delete it. Also try "brctl delbr br0". If is says you have to down the interface first, do a "ip link set br0 down" or "ifconfig br0 down".
[edit]
Also remove br0 from /etc/clearos/network.conf.
[/edit]
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »