Issue
LAN subnet configuration
Buenas tardes.. acudo a ustedes por ayuda de antemano muchas gracias tengo configurado un clearOS 7 community como puerta de enlace pero al momento de entrar en operación. solo me reconoce el trafico de la red lan principal las subredes con puerta de enlace diferente no les permite el trafico.. como puedo configurar que las otras subredes también las pueda reconocer.
In IP Settings
Share this post:
Responses (1)
-
Accepted Answer
I am sorry but this is really an English language forum. I've used Google Translate to assist me:
Good afternoon ... I come to you for help in advance thank you very much I have configured a clearOS 7 community as a gateway but at the moment of entering into operation. only the network traffic of the main lan network recognizes the subnets with different gateway does not allow the traffic .. how can I configure that the other subnets can also recognize them?
How many network interfaces to you have and are they recognised by ClearOS?
It is essential that each network interface is on a different subnet, and it is best to avoid the 192.168.0.0/24 and 192.168.1.0/24 subnets if at all possible.
Have you configured the DHCP server for the LAN subnets?
Is your WAN connection Static, DHCP (or PPPoE).
If you ultimately want PPPoE on your WAN, when setting up it is best to avoid PPPoE until you get the WAN connection working and accept the double-NAT until it is working. Once it is working, then you can switch the modem to PPPoE then change the ClearOS interface. This is not necessary with Static or DHCP WAN connections. They should just work.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »