I am new to clear OS, during configuration by mistake block domain has been enabled.
There after I am not able to login to the clear os web page with https://CLEAROSIP:81, how ever I can login to the server with putty (SSH).
how can i clear the settings through SSH login.
Regards,
Anoop
There after I am not able to login to the clear os web page with https://CLEAROSIP:81, how ever I can login to the server with putty (SSH).
how can i clear the settings through SSH login.
Regards,
Anoop
Share this post:
Responses (3)
-
Accepted Answer
Try using the machines hostname/FQDN instead of ip, if you enable the block ip option it does just that
https://clearoshostname:81 instead of https://x.x.x.x:81 -
Accepted Answer
Hi Peter,
Thanks for your help.
Once i removed proxy setting from ny local PC, Icould connect to the server through web. however internet accesses was dissabled at that moment.
then i have chnages back the block IP domanins to dissabled in the general setting of content filter.
Then I am abled to connect to server with the proxy setting enabled.
Thanks & Regards,
Anoop -
Accepted Answer
I'm not sure if you are having proxy/content filter issues, or just general firewall/network issues. Regardless, here are some tips:
- If you have web proxy settings configured in your web browser, please make sure there is an exception for connecting to the ClearOS IP.
- If the firewall is blocking you, login via SSH and run the following as root: service firewall stop
If you can connect to the web-based administration tool after doing this, it is a matter of trying to figure things out. On the "Network - Settings - IP Settings" page, is the Mode correct? How about the Network Roles for each of the interfaces? After making any changes, the firewall will likely start again and you may need to stop it.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »