-
Thanks anyway - Achim
-
-
something else: I made changes on the master.cf of postfix
I did this for emails forom user@page1.com and user@page1.com not to be send from the same IP
I assume this is not the cause of the problem...
Thanks Nick! This is great -
-
thanks for the reply
-
-
HELP! eth1 has link but accepts no traffic
Hi folks
I have a strange situation. My ClearOS 5.2 machine has two NICs eth0 and eth1 with two fix IP addresses from the server farm.
The networksetings are in "gateway mode" and both NICx are set up as external.
eth0 with IP0 serves one web page www.page1.com
eth0 wiht IP1 serves the second web page www.page2.com
eth0 had never problems. The web site is always accessable
eth1 while the IP still answers ping packages it often blocks the traffic on all testet ports (ssh, http, https, smtp, 81, 83)
restaring the network with solves the problem:
since the server also looses emails to people written to email@page2.com it becomes very annoying.
I stopped the intrusion detecten and prevention system services - but it still has the same problem.
PLEASE HELP. About 50 volunteers work on this system.
Greetings - Achim -
-
Hi Nick,
sorry for the confusion. What I really meant is that I can ping hosts on the network B but not on the network A from my windows road warrior machine.
You may need to add further subnets to your site-site VPN from 10.8.0.0/24 to 10.7.7.0/24.
I think you are correct I need enable the IP flow between this networks. But how do I do this? Can you give me a hint?
Achim -
-
Hi Nick,
thank you for your reply.
in the routerVM_B I already had this conf file. I disabled the user password auth. User authentification is done with certificate files.
On my windows 7 machine I have the following routing table.
The ping to 10.7.8.8 arrives with the host 10.7.7.7 on the network A does not get through.
Achim -
-
Road warrior vpn into distributed network connected through VPN^
Hi,
I have two VMware server SrvA and SrvB in location A and B
Location A has network 10.7.7.x
Location B has network 10.7.8.x
SrvA runs routerVM_A (clearos 5.2) with openvpn (TCP 1194)
this routerVM_A connects all server 10.7.7.x in the local network eth1 to the internet eth0 and computer connected through the vpn on routerVM_A tun0
SrvB runs routerVM_B (clearos 6.5.) with openvpn (UDP 1194)
this routerVM_B connects all server 10.7.8.x in the local network eth1 to the internet and computer connected through the vpn on routerVM_B
routerVM_B is also a ovenvpn client to routerVM_B.
connected with ssh on routerVM_B I can reach all networks ping internet, hosts on local network 10.7.8.x and remote network 10.7.7.x (routerVM_A)
Road warriors connecting to routerVM_B can access all servers on network on location B 10.7.8.x. They can not access hosts on network 10.7.7.x (routerVM_A)
Question: how can I route traffic from road warriors connected to routerVM_B to access hosts on the network A 10.7.7.x
I would appreciate your input
Greetings Achim -
Toggle Sidebar