Source-based routes no longer seem to be functioning. My ClearOS box has been running great for a couple of years now. Today, I notice a ton of lag and realize it's not routing my computer through the right port.
I have two DSL lines on ENP2S0 and ENP3S0. In Multi-Wan they are both set to primary and say they are online. ENP2S0 has a weight of 100 so that machines will pick that interface by default. ENP3S0 has a weight of 1 so that only machines I designate with source-based routes will use that connection.
I have a source-based route that says that 172.0.0.100 (my computer) will use ENP3S0. I verified my computer's IP and using a traceroute, I can tell it is forcing me through ENP2S0 even with that route enabled. If I reverse the weights, then it runs me through ENP3S0 and traceroute confirms this...so I know ENP3S0 is working fine. I haven't changed the config on my router for months.
It's completely ignoring my source-based route. I've tried deleting and re-creating the source route rule. I've restarted ClearOS. I've restarted my DSL modems. I checked my logs and I don't see anything weird...looks like everything is initializing fine. Looks like a bunch of firewall/multiwan plugins might have gotten updated recently...
I have two DSL lines on ENP2S0 and ENP3S0. In Multi-Wan they are both set to primary and say they are online. ENP2S0 has a weight of 100 so that machines will pick that interface by default. ENP3S0 has a weight of 1 so that only machines I designate with source-based routes will use that connection.
I have a source-based route that says that 172.0.0.100 (my computer) will use ENP3S0. I verified my computer's IP and using a traceroute, I can tell it is forcing me through ENP2S0 even with that route enabled. If I reverse the weights, then it runs me through ENP3S0 and traceroute confirms this...so I know ENP3S0 is working fine. I haven't changed the config on my router for months.
It's completely ignoring my source-based route. I've tried deleting and re-creating the source route rule. I've restarted ClearOS. I've restarted my DSL modems. I checked my logs and I don't see anything weird...looks like everything is initializing fine. Looks like a bunch of firewall/multiwan plugins might have gotten updated recently...
In Multiwan
Share this post:
Responses (2)
-
Accepted Answer
Sorry for that. MultiWAN, QoS and the Application and Protocol filters were updated and it seems to have broken some of the MultiWAN. There is another thread here where I have posted downgrade instructions. I will try to keep the other thread updated with developments.
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »