Could use some help...I searched, but particulars are not necessarily the same...
I just upgraded my 6.x box to 7.2 and added a second LAN nic.
My goal is to use rules to disable the second NIC at a time of my choosing, but otherwise it would act like it is on the first LAN NIC subnet.
WAN GATEWAY by default is 192.168.1.1
LAN SEGMENT #1 is
192.168.1.0/24
255.255.255.0
LAN SEGMENT #2 is
192.168.2.0/24
255.255.255.0
How best in 7.2 can I set up a static route between the two? Each LAN works fine through the gateway right now, but can't "see" each others machines internal to the LAN...
Thanks, in advance!
Jim
I just upgraded my 6.x box to 7.2 and added a second LAN nic.
My goal is to use rules to disable the second NIC at a time of my choosing, but otherwise it would act like it is on the first LAN NIC subnet.
WAN GATEWAY by default is 192.168.1.1
LAN SEGMENT #1 is
192.168.1.0/24
255.255.255.0
LAN SEGMENT #2 is
192.168.2.0/24
255.255.255.0
How best in 7.2 can I set up a static route between the two? Each LAN works fine through the gateway right now, but can't "see" each others machines internal to the LAN...
Thanks, in advance!
Jim
In IP Settings
Share this post:
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »