I've installed the Clear OS 7 , and i have 2 wans and 2 lans like:
WAN1 - 240MB
WAN2 - 50MB
LAN1- 192.168.50.0/24
LAN2 - 192.168.100.0/24
What i need is:
All traffic from 192.168.50.0/24 goes to WAN1 and all traffic from 192.168.100.0/24 goes to WAN2 and when one of the WANs became down the other WAN assuming all traffic for all LANs.
=
I tryed to make a Multi-WAN source-based route on web, like this:
name= Rule 1
IP Address= 192.168.50.0/24
Interface = enp2s0 (WAN1)
name= Rule2
IP Address= 192.168.100.0/24
Interface = enp3s0 (WAN2)
But this configuration didn't work my traffic still changing between the 2 WANs.
is this possible? i'm newer in clear os and linux commands, could anyone help me please?
WAN1 - 240MB
WAN2 - 50MB
LAN1- 192.168.50.0/24
LAN2 - 192.168.100.0/24
What i need is:
All traffic from 192.168.50.0/24 goes to WAN1 and all traffic from 192.168.100.0/24 goes to WAN2 and when one of the WANs became down the other WAN assuming all traffic for all LANs.
=
I tryed to make a Multi-WAN source-based route on web, like this:
name= Rule 1
IP Address= 192.168.50.0/24
Interface = enp2s0 (WAN1)
name= Rule2
IP Address= 192.168.100.0/24
Interface = enp3s0 (WAN2)
But this configuration didn't work my traffic still changing between the 2 WANs.
is this possible? i'm newer in clear os and linux commands, could anyone help me please?
In Multi-WAN
Share this post:
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »