Hi,
I have 4 network cards:
eth0 --> Lan
eth1 --> Wan1 (direct connection with public IP)
eth2 --> Wan2 (cable provider - nat router)
eth3 --> Wan3 (3G provider - nat router)
After installing Multiwan, access from client to internet is working fine.
But when try to reach the webconfig by using https://wan1:81, https://wan2:81 or https://wan3:81 only the connection on wan1 is working. I cannot reach the webconfig from Internet by using the wan2 or wan3 internet connections.
additional information: WAN2 and WAN3 are NAT routers with a privat IP on ClearOS side, but Port forwarding is enabled on both routers and connecting the routers to a standalone server shows that port 81 is forwarded correctly. So the reason for the problem is not the router configuration.
Maybe Multiwan cannot be used to publish services on all WAN connections?
Martin
BTW: I'm using current stable version (6.3).
I have 4 network cards:
eth0 --> Lan
eth1 --> Wan1 (direct connection with public IP)
eth2 --> Wan2 (cable provider - nat router)
eth3 --> Wan3 (3G provider - nat router)
After installing Multiwan, access from client to internet is working fine.
But when try to reach the webconfig by using https://wan1:81, https://wan2:81 or https://wan3:81 only the connection on wan1 is working. I cannot reach the webconfig from Internet by using the wan2 or wan3 internet connections.
additional information: WAN2 and WAN3 are NAT routers with a privat IP on ClearOS side, but Port forwarding is enabled on both routers and connecting the routers to a standalone server shows that port 81 is forwarded correctly. So the reason for the problem is not the router configuration.
Maybe Multiwan cannot be used to publish services on all WAN connections?
Martin
BTW: I'm using current stable version (6.3).
In Multiwan
Share this post:
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »