Forums

Cumhur ata
Cumhur ata
Offline
Resolved
0 votes
Hi;

I haveClearOS Lite Edition. Ans 50Mbits 2 WAN and 1 LAN connection on my network. Servers use one IP to reach internet and other computer and mobil devices use other IP to balance of my ınternet. My question is soma application including apple Store does not connect. I have disabled Content filtering and Application filtering but nothing changed.
I do not know how to check ot watch What is the problem or what does not allow this applications? I am not experienced about ClearOS?
I am not sure This problem is related to each other but at the same time ClearOS interface is very slow. sometime I click some links on ClearOS daskboard (ay link) but The link opens more than 20-30 seconds after.

Version ClearOS release 7.4.0 (Final)
Kernel Version 3.10.0-693.17.1.v7.x86_64
Wednesday, June 20 2018, 08:12 PM
Share this post:
Responses (3)
  • Accepted Answer

    Thursday, June 21 2018, 07:09 AM - #Permalink
    Resolved
    0 votes
    Please can you check the output of "dmesg" to see if your NIC is hanging or resetting?

    Can you leave ClearOS to sort out the load balancing just by setting the weightings on the interfaces?

    Another approach to subnetting may be a mixture of static and dynamic leases on your LAN. The Source Based rules will accept a subnet in CIDR form, so if you redo your dhcp range into blocks which can be subnetted, rule creation may be easier. As an example, if you only need up to 64 mobile devices, make the DHCP subnet x.y.z.128 - x.y.z.191. You can create a simple source based rule for them using the IP address x.y.z.128/26.

    For your other devices assign them to anther mini-subnet within you LAN subnet using Static Leases in the DHCP server. Chose another range, say x.y.z.32/27 will give you 32 IP addresses. Note that if you subnet like this, if you use it, The PPTP VPN inconveniently takes the range .80-.99 You could change this to a more subnet friendly range e.g. 96-128 but I recommend you not to use the PPTP VPN as even its creators, Microsoft, say not to use it for security reasons. Now you can use another single source based rule for the static devices. Note you may need to reboot the static devices or wait until their leases expire before they start using the new IP's.

    I have no idea how the source based routes play with the port based routes and I don't have MultiWAN to test. I don't see the need for a DNS rule either, especially if ClearOS is being used as the DNS resolver for the LAN (if the ClearOS DHCP server is set with its own LAN IP as the DHCP server).
    The reply is currently minimized Show
  • Accepted Answer

    Cumhur ata
    Cumhur ata
    Offline
    Wednesday, June 20 2018, 09:25 PM - #Permalink
    Resolved
    0 votes
    Hi;

    I tried Destination Based rules for DNS, HTTP and HTTPS but they did not work. Internet connection randomly interrupted while lots of clients try to surf on the internet. So I am using Source based rules for each Ip addressess This means so muc IP addresses so much rules :( May be Source based rules do not work with Destination Based Rules I do now know :(/
    NO I do not have different ISP I have 2 static IP addresses from the same ISP but I have unchecked Automaticly One and using Google DNS
    Here is the output of
    lspci -k | grep Eth -A 3


    [root@gateway ~]# lspci -k | grep Eth -A 3
    02:00.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
    Subsystem: VMware PRO/1000 MT Single Port Adapter
    Kernel driver in use: e1000
    Kernel modules: e1000
    02:01.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
    Subsystem: VMware PRO/1000 MT Single Port Adapter
    Kernel driver in use: e1000
    Kernel modules: e1000
    02:03.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet Controller (Copper) (rev 01)
    Subsystem: VMware PRO/1000 MT Single Port Adapter
    Kernel driver in use: e1000
    Kernel modules: e1000
    [root@gateway ~]#
    The reply is currently minimized Show
  • Accepted Answer

    Wednesday, June 20 2018, 08:42 PM - #Permalink
    Resolved
    0 votes
    What is the output of:
    lspci -k | grep Eth -A 3


    As you have multiwan, do you have different ISP's for each WAN? If so, have you configured ClearOS to use public DNS servers (e.g. OpenDNS or GoogleDNS) and not automatic ones? How are you splitting the traffic in ClearOS. Are you using source based routes?
    The reply is currently minimized Show
Your Reply