Found this on wikisuite but it is not helping.

link

[edit]
- although your problem may be different. What else was installed at the same time as kimchi?
[/edit]

This is a default install with only Kimchi. Fresh and new from ISO 7.7.

I've seen that thread and I installed app-dns. After that I rebooted the server and ClearOS started with wizard and there were dns errors. So I removed the updated app-dns...

That is really not helping. When kimchi was installed, it should have installed wok and a bunch of other rpm's. A lot of them would be libvirt rpms but what were they? Can you post all the rpm's installed at the same time as app-kimchi from your yum log.

re the app-dns installation. Are you saying that you installed it before the first-run wizard? If so, what errors was it giving? I am wondering if it has something to do with having no trusted interfaces when first installed. This is something I would like to debug if at all possible. Is your server in standalone or gateway mode?

[edit]
I forgot to add, now you've run the wizard, can you please reinstall the app-dns update. It has a feature you need or you will need to do a manual configuration.
[/edit]

I do see an install error:

sed: can't read /etc/dnsmasq.d/*: No such file or directory

But it did all the right things. I'll see if I can correct the issue.

[edit]
I was being an idiot. Most of the output removed ....
The one line error is being corrected in app-dns-2.7.5.
[edit]

Nick Howitt wrote:

That is really not helping. When kimchi was installed, it should have installed wok and a bunch of other rpm's. A lot of them would be libvirt rpms but what were they? Can you post all the rpm's installed at the same time as app-kimchi from your yum log.

Yes, your right it installed a lot of dependencies. The installed rpms list:

Jan 31 13:23:05 Installed: yajl-2.0.4-4.el7.x86_64

Jan 31 13:23:05 Installed: glusterfs-libs-3.12.2-47.2.el7.x86_64

Jan 31 13:23:05 Installed: 2:libogg-1.3.0-7.el7.x86_64

Jan 31 13:23:05 Installed: gperftools-libs-2.6.1-1.el7.x86_64

Jan 31 13:23:05 Installed: iscsi-initiator-utils-iscsiuio-6.2.0.874-11.el7.x86_64

Jan 31 13:23:05 Installed: iscsi-initiator-utils-6.2.0.874-11.el7.x86_64

Jan 31 13:23:06 Installed: libtirpc-0.2.4-0.16.el7.x86_64

Jan 31 13:23:06 Installed: libevent-2.0.21-4.el7.x86_64

Jan 31 13:23:06 Installed: fuse-libs-2.9.2-11.el7.x86_64

Jan 31 13:23:06 Installed: bzip2-1.0.6-13.el7.x86_64

Jan 31 13:23:06 Installed: boost-system-1.53.0-27.el7.x86_64

Jan 31 13:23:06 Installed: boost-thread-1.53.0-27.el7.x86_64

Jan 31 13:23:06 Installed: unbound-libs-1.6.6-1.el7.x86_64

Jan 31 13:23:07 Installed: rpcbind-0.2.0-48.el7.x86_64

Jan 31 13:23:07 Installed: perl-hivex-1.3.10-6.9.el7.x86_64

Jan 31 13:23:07 Installed: hivex-1.3.10-6.9.el7.x86_64

Jan 31 13:23:07 Installed: python2-pyasn1-0.1.9-7.el7.noarch

Jan 31 13:23:07 Installed: libcollection-0.7.0-32.el7.x86_64

Jan 31 13:23:07 Installed: python-six-1.9.0-2.el7.noarch

Jan 31 13:23:07 Installed: augeas-libs-1.4.0-9.el7.x86_64

Jan 31 13:23:07 Installed: libiscsi-1.9.0-7.el7.x86_64

Jan 31 13:23:07 Installed: rdma-core-22.1-3.el7.x86_64

Jan 31 13:23:07 Installed: libibverbs-22.1-3.el7.x86_64

Jan 31 13:23:07 Installed: lzop-1.03-10.el7.x86_64

Jan 31 13:23:07 Installed: boost-random-1.53.0-27.el7.x86_64

Jan 31 13:23:07 Installed: libref_array-0.1.5-32.el7.x86_64

Jan 31 13:23:07 Installed: boost-iostreams-1.53.0-27.el7.x86_64

Jan 31 13:23:08 Installed: 1:librados2-10.2.5-4.el7.x86_64

Jan 31 13:23:08 Installed: 1:librbd1-10.2.5-4.el7.x86_64

Jan 31 13:23:08 Installed: libbasicobjects-0.1.1-32.el7.x86_64

Jan 31 13:23:08 Installed: python-ipaddress-1.0.16-2.el7.noarch

Jan 31 13:23:08 Installed: python-lxml-3.2.1-4.el7.x86_64

Jan 31 13:23:09 Installed: python2-psutil-2.2.1-5.el7.x86_64

Jan 31 13:23:09 Installed: 10:qemu-kvm-common-1.5.3-167.el7_7.1.x86_64

Jan 31 13:23:09 Installed: librdmacm-22.1-3.el7.x86_64

Jan 31 13:23:09 Installed: netcf-libs-0.2.8-4.el7.x86_64

Jan 31 13:23:09 Installed: gnutls-dane-3.3.29-9.el7_6.x86_64

Jan 31 13:23:09 Installed: libverto-libevent-0.2.5-4.el7.x86_64

Jan 31 13:23:09 Installed: 1:libvorbis-1.3.3-8.el7.1.x86_64

Jan 31 13:23:09 Installed: celt051-0.5.1.3-8.el7.x86_64

Jan 31 13:23:09 Installed: flac-libs-1.3.0-5.el7_1.x86_64

Jan 31 13:23:10 Installed: glusterfs-3.12.2-47.2.el7.x86_64

Jan 31 13:23:10 Installed: glusterfs-client-xlators-3.12.2-47.2.el7.x86_64

Jan 31 13:23:10 Installed: glusterfs-api-3.12.2-47.2.el7.x86_64

Jan 31 13:23:10 Installed: 10:qemu-img-1.5.3-167.el7_7.1.x86_64

Jan 31 13:23:10 Installed: glusterfs-cli-3.12.2-47.2.el7.x86_64

Jan 31 13:23:10 Installed: libcgroup-0.41-21.el7.x86_64

Jan 31 13:23:10 Installed: 1:quota-nls-4.01-19.el7.noarch

Jan 31 13:23:10 Installed: libvirt-bash-completion-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:10 Installed: 2:nmap-ncat-6.40-19.el7.x86_64

Jan 31 13:23:10 Installed: autogen-libopts-5.18-5.el7.x86_64

Jan 31 13:23:11 Installed: gnutls-utils-3.3.29-9.el7_6.x86_64

Jan 31 13:23:11 Installed: 1:nginx-filesystem-1.12.2-2.el7.noarch

Jan 31 13:23:11 Installed: libwebp-0.3.0-7.el7.x86_64

Jan 31 13:23:11 Installed: python-pillow-2.0.0-19.gitd1c6db8.el7.x86_64

Jan 31 13:23:11 Installed: perl-libintl-1.20-12.el7.x86_64

Jan 31 13:23:11 Installed: scrub-2.5.2-7.el7.x86_64

Jan 31 13:23:11 Installed: libasyncns-0.8-7.el7.x86_64

Jan 31 13:23:11 Installed: opus-1.0.2-6.el7.x86_64

Jan 31 13:23:12 Installed: spice-server-0.14.0-7.el7.x86_64

Jan 31 13:23:12 Installed: python2-futures-3.1.1-5.el7.noarch

Jan 31 13:23:12 Installed: sos-3.7-10.el7.centos.noarch

Jan 31 13:23:12 Installed: keyutils-1.5.8-3.el7.x86_64

Jan 31 13:23:12 Installed: python-enum34-1.0.4-1.el7.noarch

Jan 31 13:23:12 Installed: lsof-4.87-6.el7.x86_64

Jan 31 13:23:12 Installed: fuse-2.9.2-11.el7.x86_64

Jan 31 13:23:12 Installed: libusal-1.1.11-25.el7.x86_64

Jan 31 13:23:12 Installed: genisoimage-1.1.11-25.el7.x86_64

Jan 31 13:23:12 Installed: 1yparted-3.9-15.el7.x86_64

Jan 31 13:23:12 Installed: gdisk-0.8.10-3.el7.x86_64

Jan 31 13:23:12 Installed: tcp_wrappers-7.6-77.el7.x86_64

Jan 31 13:23:13 Installed: 1:quota-4.01-19.el7.x86_64

Jan 31 13:23:13 Installed: ipxe-roms-qemu-20180825-2.git133f4c.el7.noarch

Jan 31 13:23:13 Installed: PyPAM-0.5.0-19.el7.x86_64

Jan 31 13:23:13 Installed: cyrus-sasl-gssapi-2.1.26-23.el7.x86_64

Jan 31 13:23:13 Installed: libvirt-libs-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:14 Installed: libvirt-client-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:14 Installed: perl-Sys-Virt-4.5.0-2.el7.x86_64

Jan 31 13:23:14 Installed: libvirt-python-4.5.0-1.el7.x86_64

Jan 31 13:23:14 Installed: mtools-4.0.18-5.el7.x86_64

Jan 31 13:23:14 Installed: syslinux-4.05-15.el7.x86_64

Jan 31 13:23:14 Installed: syslinux-extlinux-4.05-15.el7.x86_64

Jan 31 13:23:14 Installed: usbredir-0.7.1-3.el7.x86_64

Jan 31 13:23:14 Installed: 1:sgabios-bin-0.20110622svn-4.el7.noarch

Jan 31 13:23:14 Installed: python-ipaddr-2.1.11-2.el7.noarch

Jan 31 13:23:14 Installed: python-ethtool-0.8-8.el7.x86_64

Jan 31 13:23:15 Installed: osinfo-db-20190319-2.el7.noarch

Jan 31 13:23:15 Installed: spice-html5-0.1.7-1.el7.noarch

Jan 31 13:23:15 Installed: libnfsidmap-0.25-19.el7.x86_64

Jan 31 13:23:15 Installed: supermin5-5.1.19-1.el7.x86_64

Jan 31 13:23:15 Installed: attr-2.4.46-13.el7.x86_64

Jan 31 13:23:15 Installed: python-ldap-2.4.15-2.el7.x86_64

Jan 31 13:23:15 Installed: gd-2.0.35-26.el7.x86_64

Jan 31 13:23:15 Installed: 1:nginx-mod-http-image-filter-1.12.2-2.el7.x86_64

Jan 31 13:23:15 Installed: 1:nginx-mod-http-geoip-1.12.2-2.el7.x86_64

Jan 31 13:23:15 Installed: 1:nginx-mod-http-xslt-filter-1.12.2-2.el7.x86_64

Jan 31 13:23:15 Installed: 1:nginx-mod-stream-1.12.2-2.el7.x86_64

Jan 31 13:23:15 Installed: 1:nginx-mod-http-perl-1.12.2-2.el7.x86_64

Jan 31 13:23:16 Installed: 1:nginx-1.12.2-2.el7.x86_64

Jan 31 13:23:16 Installed: 1:nginx-mod-mail-1.12.2-2.el7.x86_64

Jan 31 13:23:16 Installed: 1:nginx-all-modules-1.12.2-2.el7.noarch

Jan 31 13:23:16 Installed: 1:app-nginx-core-2.3.0-1.v7.noarch

Jan 31 13:23:16 Installed: gsm-1.0.13-11.el7.x86_64

Jan 31 13:23:16 Installed: libsndfile-1.0.25-10.el7.x86_64

Jan 31 13:23:16 Installed: pulseaudio-libs-10.0-5.el7.x86_64

Jan 31 13:23:16 Installed: seabios-bin-1.11.0-2.el7.noarch

Jan 31 13:23:16 Installed: python-ply-3.4-11.el7.noarch

Jan 31 13:23:16 Installed: python-pycparser-2.14-1.el7.noarch

Jan 31 13:23:17 Installed: python-cffi-1.6.0-5.el7.x86_64

Jan 31 13:23:17 Installed: m2crypto-0.21.1-17.el7.x86_64

Jan 31 13:23:17 Installed: radvd-2.17-3.el7.x86_64

Jan 31 13:23:17 Installed: squashfs-tools-4.3-0.21.gitaae0aff4.el7.x86_64

Jan 31 13:23:17 Installed: python-idna-2.4-1.el7.noarch

Jan 31 13:23:17 Installed: hexedit-1.2.13-5.el7.x86_64

Jan 31 13:23:17 Installed: python2-markdown-2.4.1-4.el7.noarch

Jan 31 13:23:17 Installed: python-cherrypy-3.2.2-4.el7.noarch

Jan 31 13:23:17 Installed: libpath_utils-0.2.1-32.el7.x86_64

Jan 31 13:23:17 Installed: libini_config-1.3.1-32.el7.x86_64

Jan 31 13:23:18 Installed: gssproxy-0.7.0-26.el7.x86_64

Jan 31 13:23:18 Installed: 1:nfs-utils-1.3.0-0.65.el7.x86_64

Jan 31 13:23:18 Installed: python-repoze-lru-0.4-3.el7.noarch

Jan 31 13:23:18 Installed: python2-jsonschema-2.5.1-4.el7.noarch

Jan 31 13:23:18 Installed: python-backports-1.0-8.el7.x86_64

Jan 31 13:23:18 Installed: python-backports-ssl_match_hostname-3.5.0.1-1.el7.noarch

Jan 31 13:23:18 Installed: python-setuptools-0.9.8-7.el7.noarch

Jan 31 13:23:18 Installed: python-websockify-0.6.0-2.el7.noarch

Jan 31 13:23:18 Installed: novnc-0.5.1-2.el7.noarch

Jan 31 13:23:19 Installed: python2-cryptography-1.7.2-2.el7.x86_64

Jan 31 13:23:19 Installed: python-paramiko-2.1.1-9.el7.noarch

Jan 31 13:23:19 Installed: python-pygments-1.4-10.el7.noarch

Jan 31 13:23:19 Installed: python2-cheetah-2.4.4-5.el7.x86_64

Jan 31 13:23:21 Installed: wok-2.5.0-1.v7.noarch

Jan 31 13:23:21 Installed: libconfig-1.4.9-5.el7.x86_64

Jan 31 13:23:21 Installed: numad-0.5-18.20150602git.el7.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-core-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-network-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-nwfilter-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-config-network-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-qemu-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-secret-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-interface-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-nodedev-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-config-nwfilter-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-lxc-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-mpath-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-scsi-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-iscsi-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-disk-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-logical-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-gluster-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-rbd-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-daemon-driver-storage-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: libvirt-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:22 Installed: seavgabios-bin-1.11.0-2.el7.noarch

Jan 31 13:23:23 Installed: 10:qemu-kvm-1.5.3-167.el7_7.1.x86_64

Jan 31 13:23:23 Installed: libvirt-daemon-kvm-4.5.0-23.el7_7.3.x86_64

Jan 31 13:23:23 Installed: 1:libguestfs-1.40.2-5.el7_7.2.x86_64

Jan 31 13:23:23 Installed: 1erl-Sys-Guestfs-1.40.2-5.el7_7.2.x86_64

Jan 31 13:23:24 Installed: 1:libguestfs-tools-c-1.40.2-5.el7_7.2.x86_64

Jan 31 13:23:24 Installed: 1:libguestfs-tools-1.40.2-5.el7_7.2.noarch

Jan 31 13:23:24 Installed: 1ython-libguestfs-1.40.2-5.el7_7.2.x86_64

Jan 31 13:23:24 Installed: python-magic-5.11-35.el7.noarch

Jan 31 13:23:25 Installed: kimchi-2.5.0-0.v7.noarch

Jan 31 13:23:25 Installed: 1:app-kimchi-core-1.1.8-1.v7.noarch

Jan 31 13:23:25 Installed: 1:app-kimchi-1.1.8-1.v7.noarch

Nick Howitt wrote:

re the app-dns installation. Are you saying that you installed it before the first-run wizard? If so, what errors was it giving? I am wondering if it has something to do with having no trusted interfaces when first installed. This is something I would like to debug if at all possible. Is your server in standalone or gateway mode?

[edit]
I forgot to add, now you've run the wizard, can you please reinstall the app-dns update. It has a feature you need or you will need to do a manual configuration.
[/edit]

No, the wizard was executed before I installed the updated app-dns. I try again less see what happens!


Update: Haven't the slightest idea why it triggered the wizard the first time after rebooting the server. User error? The only way to find out is to do a complete re-install of ClearOS.

Anyway, it's updated now.

Jan 31 13:31:34 Updated: 1:app-dns-core-2.7.4-1.v7.noarch

Jan 31 13:31:35 Updated: 1:app-dns-2.7.4-1.v7.noarch

Jan 31 13:38:43 Erased: 1:app-dns-2.7.4-1.v7.noarch

Jan 31 13:38:43 Erased: 1:app-dns-core-2.7.4-1.v7.noarch

Jan 31 13:39:20 Installed: 1:app-dns-core-2.7.2-1.v7.noarch

Jan 31 13:39:20 Installed: 1:app-dns-2.7.2-1.v7.noarch

Jan 31 19:36:14 Updated: 1:app-dns-core-2.7.4-1.v7.noarch

Jan 31 19:36:14 Updated: 1:app-dns-2.7.4-1.v7.noarch

You see my first try in the log..

Sorry to hi-jack the thread a bit but it's kind of related.

So, I have just installed Kimchi based on the instructions from Wikisuite.
It won't however start.

a systemctl status libvirtd -l gives me the following and I don't know how to continue:

● libvirtd.service - Virtualization daemon

   Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: enabled)

   Active: active (running) since sön 2021-03-07 18:05:03 CET; 1h 10min ago

     Docs: man:libvirtd(8)

           https://libvirt.org

 Main PID: 1563 (libvirtd)

    Tasks: 17 (limit: 32768)

   CGroup: /system.slice/libvirtd.service

           └─1563 /usr/sbin/libvirtd



mar 07 18:05:16 xxx.yyy.zzz dnsmasq[3069]: failed to bind DHCP server socket: Address already in use

mar 07 18:05:16 xxx.yyy.zzz libvirtd[1563]: 2021-03-07 17:05:16.704+0000: 2704: info : libvirt version: 4.5.0, package: 36.el7_9.3 (CentOS BuildSystem <http://bugs.centos.org>;, 2020-11-16-16:25:20, x86-01.bsys.centos.org)

mar 07 18:05:16 xxx.yyy.zzz libvirtd[1563]: 2021-03-07 17:05:16.704+0000: 2704: info : hostname: xxx.yyy.zzz

mar 07 18:05:16 xxx.yyy.zzz libvirtd[1563]: 2021-03-07 17:05:16.704+0000: 2704: error : virCommandWait:2709 : internal error: Child process (VIR_BRIDGE_NAME=virbr0 /usr/sbin/dnsmasq --conf-file=/var/lib/libvirt/dnsmasq/default.conf --leasefile-ro --dhcp-script=/usr/libexec/libvirt_leaseshelper) unexpected exit status 2:

mar 07 18:05:16 xxx.yyy.zzz libvirtd[1563]: dnsmasq: failed to bind DHCP server socket: Address already in use

The server is currently set to Gateway Mode but I don't have the need for it any longer since I'm just using it as a standalone server, so would my problem be easier to fix if I put it to Standalone and can this just be changed without anything else breaks?

Server currently only have two NIC's, External and LAN. No VLAN no Virtual and no Bridge, Bridge button is not even enabled.

Any help is appreciated.

Please create a file in /etc/dnsmasq.d. I called mine for_libvirt. In it put:

bind-dynamic

except-interface=virbr0

Then I think it best is you can restart the server. You could try restarting dnsmasq then libvirtd, but I have a feeling it won't succeed.

Nick Howitt wrote:

Please create a file in /etc/dnsmasq.d. I called mine for_libvirt. In it put:

bind-dynamic

except-interface=virbr0

Then I think it best is you can restart the server. You could try restarting dnsmasq then libvirtd, but I have a feeling it won't succeed.

Did you call it "_libvirt" or "_libvirt.", not "_libvirt.conf"?

Maybe a stupid question, but I'm not that skilled in Linux and thereby I have to ask.

Anyhow, tested to save it as "_libvirt" and the error disappeared but it's impossible to get Kimchi running from the UI. :-(

Probably have to go the other way and install kvm and whatever I used back in the days with Gnome as a graphical UI on the host itself, but it sucks a bit since what I've seen from screenshots of Kimchi, it would really meet my use case and I wouldn't have to go to the host machine and have a monitor, keyboard and mouse attached to it all the time.

I actually called it "for_libvirt", but you can call it what you want. It does not matter, Any file in this folder is used by dnsmasq.

Kimchi does run if you can get it going. I have it running but it was a few years ago that I got it going. It is a third party app and, unfortunately, no development has been done on it. Did you try rebooting? Is the service wokd running? If not, do a "systemctl enable wokd --now". What is going wrong when you say it is not working?

I know it's a third party app so no hard feelings from me to anyone, it's just so frustrating to be able to click the "Start" button just to see that it failed.

The wokd service seems be the problem for me, or there is at least something messed up in the Python scripts:

[root@system ~]# systemctl enable wokd --now

[root@system ~]# systemctl status wokd -l

● wokd.service - Wok - Webserver Originated from Kimchi

   Loaded: loaded (/usr/lib/systemd/system/wokd.service; enabled; vendor preset: disabled)

  Drop-In: /etc/systemd/system/wokd.service.d

           └─kimchi.conf

   Active: failed (Result: exit-code) since sun 2021-03-07 22:04:50 CET; 1min 0s ago

     Docs: https://github.com/kimchi-project/wok/wiki

  Process: 13039 ExecStart=/usr/bin/wokd (code=exited, status=1/FAILURE)

 Main PID: 13039 (code=exited, status=1/FAILURE)



mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: from wok import config as config

mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: File "/usr/lib/python2.7/site-packages/wok/config.py", line 164, in <module>

mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: class WokConfig(dict):

mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: File "/usr/lib/python2.7/site-packages/wok/config.py", line 228, in WokConfig

mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: font_dir = getattr(paths, "%s_dir" % font)

mar 07 22:04:50 xxx.yyy.zzz wokd[13039]: AttributeError: 'Paths' object has no attribute 'fontawesome_dir'

mar 07 22:04:50 xxx.yyy.zzz systemd[1]: Dependency After=wokd.service dropped from unit wokd.service

mar 07 22:04:50 xxx.yyy.zzz systemd[1]: wokd.service: main process exited, code=exited, status=1/FAILURE

mar 07 22:04:50 xxx.yyy.zzz systemd[1]: Unit wokd.service entered failed state.

mar 07 22:04:50 xxx.yyy.zzz systemd[1]: wokd.service failed.

Can you try installing fontawesome-fonts:

yum install fontawesome-fonts

Let me know if it is already installed.

Wow! That seemed to be the problem!

Now I just get a NET::ERR_CERT_INVALID when accessing it but this is handled and out of scope for both ClearOS and Kimchi.

BIG THANK YOU Nick!

You will then get another issue if you upload any iso's as they don't get usable permissions. Each time you upload one can you run:

chmod 0644 /var/lib/kimchi/isos/*.iso

or, perhaps:

chown qemu:qemu /var/lib/kimchi/isos/*.iso