I have used ClearOS a number of times and am familiar with the setup process/interface.
I have a new (bought second hand) HP ProLiant MicroServer N54L (Gen7 with AMD Turion cpu).
When i boot from USB or DVD I get to the menu to install, test and install or troubleshooting.
i have tried all the options that end up installing but the syst always hangs in the same place.
The screen goes white with a flashing cursor, then goes black and starts initializing.
It always hangs on kernel_init 0x80/0x80
any suggestions?
To eliminate dodgey hardware I successfully loaded Windows with no issues.
I have a new (bought second hand) HP ProLiant MicroServer N54L (Gen7 with AMD Turion cpu).
When i boot from USB or DVD I get to the menu to install, test and install or troubleshooting.
i have tried all the options that end up installing but the syst always hangs in the same place.
The screen goes white with a flashing cursor, then goes black and starts initializing.
It always hangs on kernel_init 0x80/0x80
any suggestions?
To eliminate dodgey hardware I successfully loaded Windows with no issues.
Share this post:
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »