Hello all,
I've a HP ML370 server with a P410i Controller. I've 5 HD configured in a RAID5 system and added 3 new disks to increase it.
I've seen I can install the HP ACU software to manage my raid system and add the new disks but really doesnt know how to do that : my system is in production and I wouldn't like to break it ...
I've found this page but really doesnt know if the packages are correct. and which one to choose ... (I've Clearos 6)
if someone can help me ... thanks to all per advance
http://downloads.linux.hp.com/SDR/repo/spp/
I've a HP ML370 server with a P410i Controller. I've 5 HD configured in a RAID5 system and added 3 new disks to increase it.
I've seen I can install the HP ACU software to manage my raid system and add the new disks but really doesnt know how to do that : my system is in production and I wouldn't like to break it ...
I've found this page but really doesnt know if the packages are correct. and which one to choose ... (I've Clearos 6)
if someone can help me ... thanks to all per advance
http://downloads.linux.hp.com/SDR/repo/spp/
In Hardware
Share this post:
Responses (1)
-
Accepted Answer
Hello Arnaud,
I have a P410I controller in a Proliant microserver.
I installed "HPssacli-2.0-23.0x86_64.rpm" from the HP site.
I used "rpm -i hpssacli-2.0" to install.
You have to know all the commands because it is a cli version.
You can also shutdown the server and use the F8 promt during boot.
If you have any other questions pleas let me know.
Frans
Please login to post a reply
You will need to be logged in to be able to post a reply. Login using the form on the right or register an account if you are new here.
Register Here »