I know you didn't want to do it but you had a corrupt system which would only boot 1 out of 20 times. Troubleshooting it would have been difficult at best. You've made the right decision.

Sry for the late response, but I decided to make a proper backup and start with a clean install.
Not in the mood to make all sorts of minor changes that will not fix much, because I don't have a clue how to fix problems with the iptables.

Closing this case,

John

Ps.
I successfully reinstalled COS and now I have Internet on my network again.

You have not rebooted today and the logs have rotated so there is nothing useful in the messages log. You need to look at last week's messages log and, please, only the section during your last boot.

Also try "modprobe ip_tables" and see if that allows the firewall to restart.

lsmod | grep ipt
"No feedback"

Yesterday i tried booting all the kernels I have several times (back to 7.2), but with the same result.
I kept attempting to boot from the latest kernel until it finally worked. Normally I don't reboot my COS box.

I would not know how to look at log files during boot, but I told you that I have no experience with that.
Rebooting is not an option unless absolutely required, but I refuse to reboot 20 or more times for no reason.

I received this error message when I attempted to attach .txt files, so I had to post it here:
The file *.txt, which you are attempting to upload is in an unsupported format.

AFAIK, here is the information you requested:

boot.log

Log Entry

No data available in table

dmesg log

Log Entry

[ 0.000000] microcode: microcode updated early to revision 0x5d, date = 2010-10-02

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Initializing cgroup subsys cpuacct

[ 0.000000] Linux version 3.10.0-1127.18.2.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Sun Jul 26 15:27:06 UTC 2020

[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.18.2.el7.x86_64 root=/dev/mapper/clearos-root ro rd.lvm.lv=clearos/swap rd.lvm.lv=clearos/root rd.dm.uuid=sil_dcaibgacbgae rhgb quiet LANG=en_US.UTF-8

[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf65ffff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000bf660000-0x00000000bf666fff] ACPI data

[ 0.000000] BIOS-e820: [mem 0x00000000bf667000-0x00000000bf6fffff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x00000000bf700000-0x00000000bfffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 2.4 present.

[ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO P /D2312-A3, BIOS 6.00 R1.09.2312.A3 02/28/2007

[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-C7FFF write-protect

[ 0.000000] C8000-DFFFF uncachable

[ 0.000000] E0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable

[ 0.000000] 1 base 000000000 mask F00000000 write-back

[ 0.000000] 2 base 100000000 mask FC0000000 write-back

[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable

[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC

[ 0.000000] original variable MTRRs

[ 0.000000] reg 0, base: 3GB, range: 1GB, type UC

[ 0.000000] reg 1, base: 0GB, range: 4GB, type WB

[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB

[ 0.000000] reg 3, base: 3063MB, range: 1MB, type UC

[ 0.000000] reg 4, base: 3064MB, range: 8MB, type UC

[ 0.000000] total RAM covered: 4087M

[ 0.000000] Found optimal setting for mtrr clean up

[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 5 lose cover RAM: 0G

[ 0.000000] New variable MTRRs

[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB

[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB

[ 0.000000] reg 2, base: 3063MB, range: 1MB, type UC

[ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC

[ 0.000000] reg 4, base: 4GB, range: 1GB, type WB

[ 0.000000] e820: update [mem 0xbf700000-0xffffffff] usable ==> reserved

[ 0.000000] e820: last_pfn = 0xbf660 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [mem 0x000f7c00-0x000f7c0f] mapped at [ffffffffff200c00]

[ 0.000000] Base memory trampoline at [ffff94a040095000] 95000 size 24576

[ 0.000000] BRK [0x75e73000, 0x75e73fff] PGTABLE

[ 0.000000] BRK [0x75e74000, 0x75e74fff] PGTABLE

[ 0.000000] BRK [0x75e75000, 0x75e75fff] PGTABLE

[ 0.000000] BRK [0x75e76000, 0x75e76fff] PGTABLE

[ 0.000000] BRK [0x75e77000, 0x75e77fff] PGTABLE

[ 0.000000] RAMDISK: [mem 0x35334000-0x36991fff]

[ 0.000000] Early table checksum verification disabled

[ 0.000000] ACPI: RSDP 00000000000f7bd0 00014 (v00 PTLTD )

[ 0.000000] ACPI: RSDT 00000000bf6633ac 0004C (v01 FSC PC 00060000 LTP 00000000)

[ 0.000000] ACPI: FACP 00000000bf666af2 00074 (v01 FSC 00060000 000F4240)

[ 0.000000] ACPI: DSDT 00000000bf6633f8 036FA (v01 FSC D2312/Ax 00060000 MSFT 03000000)

[ 0.000000] ACPI: FACS 00000000bf669fc0 00040

[ 0.000000] ACPI: TCPA 00000000bf666b66 00032 (v01 Phoeni x 00060000 TL 00000000)

[ 0.000000] ACPI: SSDT 00000000bf666b98 000B6 (v01 FSC EISTCPU0 00060000 CSF 00000001)

[ 0.000000] ACPI: SSDT 00000000bf666c4e 000B6 (v01 FSC EISTCPU1 00060000 CSF 00000001)

[ 0.000000] ACPI: ASF! 00000000bf666d04 00082 (v16 OEMID OEMTBL 00060000 PTL 00000001)

[ 0.000000] ACPI: SLIC 00000000bf666d86 00176 (v01 FSC PC 00060000 LTP 00000000)

[ 0.000000] ACPI: MCFG 00000000bf666efc 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)

[ 0.000000] ACPI: HPET 00000000bf666f38 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)

[ 0.000000] ACPI: APIC 00000000bf666f70 00068 (v01 PTLTD ? APIC 00060000 LTP 00000000)

[ 0.000000] ACPI: BOOT 00000000bf666fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]

[ 0.000000] NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffcfff]

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00001000-0x00ffffff]

[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]

[ 0.000000] Normal [mem 0x100000000-0x13fffffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00001000-0x0009afff]

[ 0.000000] node 0: [mem 0x00100000-0xbf65ffff]

[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]

[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13fffffff]

[ 0.000000] On node 0 totalpages: 1046010

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 21 pages reserved

[ 0.000000] DMA zone: 3994 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 12186 pages used for memmap

[ 0.000000] DMA32 zone: 779872 pages, LIFO batch:31

[ 0.000000] Normal zone: 4096 pages used for memmap

[ 0.000000] Normal zone: 262144 pages, LIFO batch:31

[ 0.000000] Reserving Intel graphics memory at [mem 0xbf800000-0xbfffffff]

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000

[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs

[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]

[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf660000-0xbf666fff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf667000-0xbf6fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf700000-0xbfffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]

[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1

[ 0.000000] percpu: Embedded 38 pages/cpu s118784 r8192 d28672 u1048576

[ 0.000000] pcpu-alloc: s118784 r8192 d28672 u1048576 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029643

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-1127.18.2.el7.x86_64 root=/dev/mapper/clearos-root ro rd.lvm.lv=clearos/swap rd.lvm.lv=clearos/root rd.dm.uuid=sil_dcaibgacbgae rhgb quiet LANG=en_US.UTF-8

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] Memory: 4009792k/5242880k available (7784k kernel code, 1058840k absent, 174248k reserved, 5958k data, 1980k init)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] x86/pti: Unmapping kernel while in userspace

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=2.

[ 0.000000] NR_IRQS:327936 nr_irqs:440 0

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] allocated 16777216 bytes of page_cgroup

[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] hpet clockevent registered

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 1862.061 MHz processor

[ 0.001016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.12 BogoMIPS (lpj=1862061)

[ 0.001020] pid_max: default: 32768 minimum: 301

[ 0.001066] Security Framework initialized

[ 0.001081] SELinux: Initializing.

[ 0.001097] SELinux: Starting in permissive mode

[ 0.001099] Yama: becoming mindful.

[ 0.001707] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 0.004141] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.005151] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.005164] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.005532] Initializing cgroup subsys memory

[ 0.005542] Initializing cgroup subsys devices

[ 0.005545] Initializing cgroup subsys freezer

[ 0.005547] Initializing cgroup subsys net_cls

[ 0.005550] Initializing cgroup subsys blkio

[ 0.005552] Initializing cgroup subsys perf_event

[ 0.005555] Initializing cgroup subsys hugetlb

[ 0.005557] Initializing cgroup subsys pids

[ 0.005559] Initializing cgroup subsys net_prio

[ 0.005615] CPU0: Thermal monitoring enabled (TM2)

[ 0.005627] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4

[ 0.005629] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32

[ 0.005631] tlb_flushall_shift: -1

[ 0.005636] FEATURE SPEC_CTRL Not Present

[ 0.005637] FEATURE IBPB_SUPPORT Not Present

[ 0.005640] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization

[ 0.005814] Spectre V2 : Vulnerable: Retpoline without IBPB

[ 0.005817] Speculative Store Bypass: Vulnerable

[ 0.005848] MDS: Vulnerable: Clear CPU buffers attempted, no microcode

[ 0.006058] Freeing SMP alternatives: 28k freed

[ 0.009816] ACPI: Core revision 20130517

[ 0.012045] ACPI: All ACPI Tables successfully acquired

[ 0.013010] ftrace: allocating 29619 entries in 116 pages

[ 0.036520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.046939] smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (fam: 06, model: 0f, stepping: 02)

[ 0.047000] Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.

[ 0.047000] core: PEBS disabled due to CPU errata

[ 0.047000] ... version: 2

[ 0.047000] ... bit width: 40

[ 0.047000] ... generic registers: 2

[ 0.047000] ... value mask: 000000ffffffffff

[ 0.047000] ... max period: 000000007fffffff

[ 0.047000] ... fixed-purpose events: 3

[ 0.047000] ... event mask: 0000000700000003

[ 0.048712] smpboot: Booting Node 0, Processors #1 OK

[ 0.050118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[ 0.050139] Brought up 2 CPUs

[ 0.050142] smpboot: Max logical packages: 1

[ 0.050145] smpboot: Total of 2 processors activated (7448.24 BogoMIPS)

[ 0.051156] devtmpfs: initialized

[ 0.051156] x86/mm: Memory block size: 128MB

[ 0.056205] EVM: security.selinux

[ 0.056207] EVM: security.ima

[ 0.056209] EVM: security.capability

[ 0.056256] PM: Registering ACPI NVS region [mem 0xbf667000-0xbf6fffff] (626688 bytes)

[ 0.058348] atomic64 test passed for x86-64 platform with CX8 and with SSE

[ 0.058354] pinctrl core: initialized pinctrl subsystem

[ 0.058405] RTC time: 17:36:12, date: 06/05/21

[ 0.058520] NET: Registered protocol family 16

[ 0.058843] ACPI: bus type PCI registered

[ 0.058847] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.058947] PCI: MMCONFIG for domain 0000 [bus 00-0b] at [mem 0xe0000000-0xe0bfffff] (base 0xe0000000)

[ 0.058951] PCI: MMCONFIG at [mem 0xe0000000-0xe0bfffff] reserved in E820

[ 0.058963] PCI: Using configuration type 1 for base access

[ 0.064149] ACPI: Added _OSI(Module Device)

[ 0.064149] ACPI: Added _OSI(Processor Device)

[ 0.064149] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.064149] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.064149] ACPI: Added _OSI(Linux-Dell-Video)

[ 0.065467] ACPI: EC: Look up EC in DSDT

[ 0.068323] ACPI: Interpreter enabled

[ 0.068346] ACPI: (supports S0 S1 S3 S4 S5)

[ 0.068349] ACPI: Using IOAPIC for interrupt routing

[ 0.068387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.068466] ACPI: Enabled 10 GPEs in block 00 to 1F

[ 0.073490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.073499] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[ 0.073506] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[ 0.073518] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0b] only partially covers this bridge

[ 0.074232] PCI host bridge to bus 0000:00

[ 0.074237] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]

[ 0.074241] pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window]

[ 0.074244] pci_bus 0000:00: root bus resource [io 0xfe01-0xffff window]

[ 0.074248] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]

[ 0.074251] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]

[ 0.074254] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]

[ 0.074258] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]

[ 0.074261] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]

[ 0.074264] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]

[ 0.074268] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]

[ 0.074271] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]

[ 0.074274] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfedfffff window]

[ 0.074278] pci_bus 0000:00: root bus resource [mem 0xfef00000-0xffafffff window]

[ 0.074281] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffefffff window]

[ 0.074285] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.074298] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000

[ 0.074432] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000

[ 0.074445] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd00fffff]

[ 0.074459] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]

[ 0.074467] pci 0000:00:02.0: reg 0x20: [io 0x1c20-0x1c27]

[ 0.074616] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300

[ 0.074659] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]

[ 0.074749] pci 0000:00:1a.0: System wakeup disabled by ACPI

[ 0.074815] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300

[ 0.074858] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]

[ 0.074944] pci 0000:00:1a.1: System wakeup disabled by ACPI

[ 0.075025] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320

[ 0.075044] pci 0000:00:1a.7: reg 0x10: [mem 0xd0605000-0xd06053ff]

[ 0.075130] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 0.075183] pci 0000:00:1a.7: System wakeup disabled by ACPI

[ 0.075252] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300

[ 0.075273] pci 0000:00:1b.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit]

[ 0.075352] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.075466] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400

[ 0.075548] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.075606] pci 0000:00:1c.0: System wakeup disabled by ACPI

[ 0.075684] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400

[ 0.075768] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 0.075826] pci 0000:00:1c.4: System wakeup disabled by ACPI

[ 0.075898] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400

[ 0.075982] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[ 0.076044] pci 0000:00:1c.5: System wakeup disabled by ACPI

[ 0.076117] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300

[ 0.076160] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]

[ 0.076249] pci 0000:00:1d.0: System wakeup disabled by ACPI

[ 0.076315] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300

[ 0.076359] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]

[ 0.076446] pci 0000:00:1d.1: System wakeup disabled by ACPI

[ 0.076512] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300

[ 0.076555] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]

[ 0.076642] pci 0000:00:1d.2: System wakeup disabled by ACPI

[ 0.076713] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320

[ 0.076733] pci 0000:00:1d.7: reg 0x10: [mem 0xd0605400-0xd06057ff]

[ 0.076818] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.076874] pci 0000:00:1d.7: System wakeup disabled by ACPI

[ 0.076938] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[ 0.077044] pci 0000:00:1e.0: System wakeup disabled by ACPI

[ 0.077114] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100

[ 0.077199] pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]

[ 0.077206] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO

[ 0.077211] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff)

[ 0.077338] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018a

[ 0.077354] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]

[ 0.077363] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]

[ 0.077373] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]

[ 0.077382] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]

[ 0.077392] pci 0000:00:1f.2: reg 0x20: [io 0x18f0-0x18ff]

[ 0.077402] pci 0000:00:1f.2: reg 0x24: [io 0x18e0-0x18ef]

[ 0.077414] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]

[ 0.077417] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]

[ 0.077420] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]

[ 0.077423] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]

[ 0.077449] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.077553] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500

[ 0.077567] pci 0000:00:1f.3: reg 0x10: [mem 0xd0605800-0xd06058ff]

[ 0.077597] pci 0000:00:1f.3: reg 0x20: [io 0x18c0-0x18df]

[ 0.077707] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185

[ 0.077723] pci 0000:00:1f.5: reg 0x10: [io 0x1c50-0x1c57]

[ 0.077732] pci 0000:00:1f.5: reg 0x14: [io 0x1c44-0x1c47]

[ 0.077742] pci 0000:00:1f.5: reg 0x18: [io 0x1c48-0x1c4f]

[ 0.077751] pci 0000:00:1f.5: reg 0x1c: [io 0x1c40-0x1c43]

[ 0.077761] pci 0000:00:1f.5: reg 0x20: [io 0x1c10-0x1c1f]

[ 0.077770] pci 0000:00:1f.5: reg 0x24: [io 0x1c00-0x1c0f]

[ 0.077805] pci 0000:00:1f.5: PME# supported from D3hot

[ 0.077912] pci 0000:00:1f.6: [8086:284f] type 00 class 0x118000

[ 0.077932] pci 0000:00:1f.6: reg 0x10: [mem 0xd0604000-0xd0604fff 64bit]

[ 0.078135] pci 0000:00:1c.0: PCI bridge to [bus 03]

[ 0.078141] pci 0000:00:1c.0: bridge window [io 0x0000-0x0fff]

[ 0.078146] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff]

[ 0.078153] pci 0000:00:1c.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]

[ 0.078231] pci 0000:06:00.0: [1095:3132] type 00 class 0x010400

[ 0.078265] pci 0000:06:00.0: reg 0x10: [mem 0xd0104000-0xd010407f 64bit]

[ 0.078288] pci 0000:06:00.0: reg 0x18: [mem 0xd0100000-0xd0103fff 64bit]

[ 0.078304] pci 0000:06:00.0: reg 0x20: [io 0x2000-0x207f]

[ 0.078333] pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]

[ 0.078410] pci 0000:06:00.0: supports D1 D2

[ 0.078456] pci 0000:06:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.4 (capable of 7.876 Gb/s with 8 GT/s x1 link)

[ 0.078518] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.078530] pci 0000:00:1c.4: PCI bridge to [bus 06]

[ 0.078536] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]

[ 0.078541] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd01fffff]

[ 0.078623] pci 0000:09:00.0: [14e4:167b] type 00 class 0x020000

[ 0.078656] pci 0000:09:00.0: reg 0x10: [mem 0xd0200000-0xd020ffff 64bit]

[ 0.078807] pci 0000:09:00.0: PME# supported from D3hot D3cold

[ 0.078858] pci 0000:09:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:1c.5 (capable of 7.876 Gb/s with 8 GT/s x1 link)

[ 0.080021] pci 0000:00:1c.5: PCI bridge to [bus 09]

[ 0.080029] pci 0000:00:1c.5: bridge window [mem 0xd0200000-0xd02fffff]

[ 0.080111] pci 0000:0c:05.0: [10ec:8139] type 00 class 0x020000

[ 0.080132] pci 0000:0c:05.0: reg 0x10: [io 0x3000-0x30ff]

[ 0.080145] pci 0000:0c:05.0: reg 0x14: [mem 0xd0300000-0xd03000ff]

[ 0.080227] pci 0000:0c:05.0: supports D1 D2

[ 0.080231] pci 0000:0c:05.0: PME# supported from D1 D2 D3hot D3cold

[ 0.080357] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)

[ 0.080363] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]

[ 0.080368] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]

[ 0.080376] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)

[ 0.080379] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode)

[ 0.080383] pci 0000:00:1e.0: bridge window [io 0xfe01-0xffff window] (subtractive decode)

[ 0.080386] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)

[ 0.080390] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)

[ 0.080393] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)

[ 0.080396] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)

[ 0.080400] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)

[ 0.080406] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)

[ 0.080410] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)

[ 0.080413] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)

[ 0.080417] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfedfffff window] (subtractive decode)

[ 0.080420] pci 0000:00:1e.0: bridge window [mem 0xfef00000-0xffafffff window] (subtractive decode)

[ 0.080424] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffefffff window] (subtractive decode)

[ 0.080636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15)

[ 0.080717] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15)

[ 0.080796] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 10 11 12 14 15) *5

[ 0.080874] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15)

[ 0.080951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15)

[ 0.081023] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15)

[ 0.081102] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 11 12 14 15) *5

[ 0.081180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *7 9 10 11 12 14 15)

[ 0.081844] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.081844] vgaarb: loaded

[ 0.081844] vgaarb: bridge control possible 0000:00:02.0

[ 0.082052] SCSI subsystem initialized

[ 0.082100] ACPI: bus type USB registered

[ 0.082133] usbcore: registered new interface driver usbfs

[ 0.082149] usbcore: registered new interface driver hub

[ 0.082175] usbcore: registered new device driver usb

[ 0.082280] EDAC MC: Ver: 3.0.0

[ 0.082280] PCI: Using ACPI for IRQ routing

[ 0.082280] PCI: pci_cache_line_size set to 64 bytes

[ 0.082328] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]

[ 0.082331] e820: reserve RAM buffer [mem 0xbf660000-0xbfffffff]

[ 0.082530] NetLabel: Initializing

[ 0.082533] NetLabel: domain hash size = 128

[ 0.082535] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.083008] NetLabel: unlabeled traffic allowed by default

[ 0.083067] HPET: 3 timers in total, 0 timers will be used for per-cpu timer

[ 0.083072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.083078] hpet0: 3 comparators, 64-bit 14.318180 MHz counter

[ 0.085019] amd_nb: Cannot enumerate AMD northbridges

[ 0.085040] Switched to clocksource hpet

[ 0.095551] pnp: PnP ACPI init

[ 0.095580] ACPI: bus type PNP registered

[ 0.095808] pnp 00:00: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)

[ 0.096138] system 00:01: [io 0x04d0-0x04d1] has been reserved

[ 0.096143] system 00:01: [io 0x1000-0x107f] could not be reserved

[ 0.096147] system 00:01: [io 0x1100-0x110f] has been reserved

[ 0.096151] system 00:01: [io 0x1180-0x11bf] has been reserved

[ 0.096155] system 00:01: [io 0x0600-0x067f] has been reserved

[ 0.096158] system 00:01: [io 0x0800-0x080f] has been reserved

[ 0.096162] system 00:01: [io 0xfe00] has been reserved

[ 0.096166] system 00:01: [io 0xff00] has been reserved

[ 0.096171] system 00:01: [mem 0xfc000000-0xfdffffff] has been reserved

[ 0.096175] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved

[ 0.096179] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved

[ 0.096183] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved

[ 0.096187] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved

[ 0.096191] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved

[ 0.096195] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved

[ 0.096200] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.096276] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.096382] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)

[ 0.096483] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)

[ 0.096554] pnp 00:05: [dma 2]

[ 0.096620] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)

[ 0.096839] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.096846] pnp: PnP ACPI: found 7 devices

[ 0.096848] ACPI: bus type PNP unregistered

[ 0.104999] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000

[ 0.105011] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000

[ 0.105016] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000

[ 0.105022] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000

[ 0.105027] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000

[ 0.105031] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000

[ 0.105041] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment

[ 0.105048] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000

[ 0.105052] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000

[ 0.105056] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105060] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105064] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105068] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105072] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105076] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000

[ 0.105080] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000

[ 0.105084] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000

[ 0.105088] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000

[ 0.105092] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000

[ 0.105102] pci 0000:00:1c.0: BAR 14: assigned [mem 0xd0400000-0xd05fffff]

[ 0.105115] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0700000-0xd08fffff 64bit pref]

[ 0.105127] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0900000-0xd0afffff 64bit pref]

[ 0.105139] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref]

[ 0.105144] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]

[ 0.105149] pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff]

[ 0.105156] pci 0000:00:1c.0: PCI bridge to [bus 03]

[ 0.105161] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]

[ 0.105168] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd05fffff]

[ 0.105173] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff 64bit pref]

[ 0.105182] pci 0000:06:00.0: BAR 6: assigned [mem 0xd0180000-0xd01fffff pref]

[ 0.105185] pci 0000:00:1c.4: PCI bridge to [bus 06]

[ 0.105190] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]

[ 0.105196] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd01fffff]

[ 0.105201] pci 0000:00:1c.4: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]

[ 0.105208] pci 0000:00:1c.5: PCI bridge to [bus 09]

[ 0.105212] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]

[ 0.105218] pci 0000:00:1c.5: bridge window [mem 0xd0200000-0xd02fffff]

[ 0.105223] pci 0000:00:1c.5: bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref]

[ 0.105231] pci 0000:00:1e.0: PCI bridge to [bus 0c]

[ 0.105235] pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]

[ 0.105241] pci 0000:00:1e.0: bridge window [mem 0xd0300000-0xd03fffff]

[ 0.105251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]

[ 0.105255] pci_bus 0000:00: resource 5 [io 0x0d00-0xfdff window]

[ 0.105258] pci_bus 0000:00: resource 6 [io 0xfe01-0xffff window]

[ 0.105262] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]

[ 0.105265] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff window]

[ 0.105268] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff window]

[ 0.105272] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff window]

[ 0.105275] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff window]

[ 0.105278] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff window]

[ 0.105282] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xdfffffff window]

[ 0.105285] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xfebfffff window]

[ 0.105289] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfedfffff window]

[ 0.105292] pci_bus 0000:00: resource 16 [mem 0xfef00000-0xffafffff window]

[ 0.105295] pci_bus 0000:00: resource 17 [mem 0xffc00000-0xffefffff window]

[ 0.105299] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]

[ 0.105302] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd05fffff]

[ 0.105306] pci_bus 0000:03: resource 2 [mem 0xd0700000-0xd08fffff 64bit pref]

[ 0.105309] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]

[ 0.105312] pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff]

[ 0.105316] pci_bus 0000:06: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]

[ 0.105319] pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]

[ 0.105323] pci_bus 0000:09: resource 1 [mem 0xd0200000-0xd02fffff]

[ 0.105326] pci_bus 0000:09: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref]

[ 0.105329] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]

[ 0.105333] pci_bus 0000:0c: resource 1 [mem 0xd0300000-0xd03fffff]

[ 0.105336] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7 window]

[ 0.105339] pci_bus 0000:0c: resource 5 [io 0x0d00-0xfdff window]

[ 0.105343] pci_bus 0000:0c: resource 6 [io 0xfe01-0xffff window]

[ 0.105346] pci_bus 0000:0c: resource 7 [mem 0x000a0000-0x000bffff window]

[ 0.105349] pci_bus 0000:0c: resource 8 [mem 0x000d0000-0x000d3fff window]

[ 0.105353] pci_bus 0000:0c: resource 9 [mem 0x000d4000-0x000d7fff window]

[ 0.105356] pci_bus 0000:0c: resource 10 [mem 0x000d8000-0x000dbfff window]

[ 0.105359] pci_bus 0000:0c: resource 11 [mem 0x000dc000-0x000dffff window]

[ 0.105363] pci_bus 0000:0c: resource 12 [mem 0x000e0000-0x000e3fff window]

[ 0.105366] pci_bus 0000:0c: resource 13 [mem 0xc0000000-0xdfffffff window]

messages log

Log Entry

Jun 6 03:06:38 alternativemedia rsyslogd: [origin software="rsyslogd" swVersion="8.24.0-57.el7_9" x-pid="18400" x-info="http://www.rsyslog.com"] rsyslogd was HUPed

Jun 6 03:06:38 alternativemedia rsyslogd: [origin software="rsyslogd" swVersion="8.24.0-57.el7_9" x-pid="18400" x-info="http://www.rsyslog.com"] rsyslogd was HUPed

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> ldap_result() failed: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> ldap_result() failed: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [54696d] <group="allusers"> ldap_result() failed: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [54696d] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [54696d] <group="allusers"> ldap_result() failed: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [54696d] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> ldap_result() failed: No such object

Jun 6 04:15:02 alternativemedia nslcd[20800]: [92dc12] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 04:30:01 alternativemedia mount: mount: unknown filesystem type 'binfmt_misc'

Jun 6 04:30:01 alternativemedia systemd: proc-sys-fs-binfmt_misc.mount mount process exited, code=exited status=32

Jun 6 04:30:01 alternativemedia systemd: Failed to mount Arbitrary Executable File Formats File System.

Jun 6 04:30:01 alternativemedia systemd: Unit proc-sys-fs-binfmt_misc.mount entered failed state.

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: new high-speed USB device number 3 using ehci-pci

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: New USB device found, idVendor=04e8, idProduct=6860, bcdDevice= 4.00

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: Product: SAMSUNG_Android

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: Manufacturer: SAMSUNG

Jun 6 04:51:59 alternativemedia kernel: usb 1-3: SerialNumber: fee3a734

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> ldap_result() failed: No such object

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> ldap_result() failed: No such object

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> ldap_result() failed: No such object

Jun 6 05:15:17 alternativemedia nslcd[20800]: [222e6b] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> ldap_result() failed: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> ldap_result() failed: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> ldap_result() failed: No such object

Jun 6 06:15:32 alternativemedia nslcd[20800]: [44d23b] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> ldap_result() failed: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> ldap_result() failed: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> ldap_result() failed: No such object

Jun 6 07:15:47 alternativemedia nslcd[20800]: [984e99] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> ldap_result() failed: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> ldap_result() failed: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> ldap_result() failed: No such object

Jun 6 08:16:02 alternativemedia nslcd[20800]: [f22d76] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> ldap_result() failed: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> cn=C. de R.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> ldap_result() failed: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> cn=M. van O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> ldap_result() failed: No such object

Jun 6 09:16:17 alternativemedia nslcd[20800]: [ac575c] <group="allusers"> cn=M. O.,ou=Users,ou=Accounts,dc=system,dc=lan: lookup error: No such object

Jun 6 12:33:20 alternativemedia kernel: usb 1-3: USB disconnect, device number 3

Jun 6 13:17:24 alternativemedia kernel: tg3 0000:09:00.0 enp9s0: Link is up at 1000 Mbps, full duplex

Jun 6 13:17:24 alternativemedia kernel: tg3 0000:09:00.0 enp9s0: Flow control is on for TX and on for RX

Jun 6 13:17:57 alternativemedia clearsyncd[19345]: System Events: Socket hang-up: 35

Jun 6 13:17:57 alternativemedia clearsyncd[19345]: System Events: Socket hang-up: 35

Thanks in advance.

.

.

.

I don't see anything particularly sensitive in firewall.conf and I don't see any obvious fault with it. You are welcome to try clearing the rules but I am 99.99% certain it will achieve nothing. You appear to have a problem with iptables not being initialised even before rules are applied. What do you get from:

lsmod | grep ipt

Have you tried booting of an older kernel since it may the kernel modules not loading?

I have asked you to look at /var/log/messages during boot (in other words not the whole log, just the section during boot), /var/log/boot.log and /var/log/dmesg (if you have one) as you are probably getting a failure during boot with some modules not loading.

Isn't there a simpler way too solve this issue ... ?!?
I was thinking about making screenshots of the firewall rules.
Clearing the firewall to factory settings.
Manually add all the rules.

Anyway, I don't know what you mean by having a look at my boot.log, dmesg log and my messages log while booting for errors.
I have no experience with log files and at the moment I refuse to reboot, because it can take a sometimes 20 times before it boots up again.
This problem has always been there, even after I changed HD's and did a full reinstall.

A reinstall is not an option, because it would not solve the boot issues and I would lose a lot of data that I cannot backup on another disk right now.

No need for firewall.conf. The problem is more fundamental.

Thanks for responding, but I don't have time right now.
I will send you the contents of firewall.conf in a personal message in a few.
The rest will have to wait until tomorrow morning.

Thanks for your quick response.
Here is the output you requested:

# firewall-start -d

firewall: Starting firewall...

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:3067: Unable to initialize table: filter: iptables who? (do you need to insmod?).

firewall: Loading environment

firewall: FW_MODE=gateway

firewall: FW_PROTO=ipv4

firewall: WANIF=enp9s0

firewall: LANIF=enp12s5

firewall: SYSWATCH_WANIF=enp9s0

firewall: WIFIF=

firewall: BANDWIDTH_QOS=off

firewall: QOS_ENGINE=/usr/clearos/apps/qos/deploy/libqos.lua

firewall: SQUID_USER_AUTHENTICATION=off

firewall: SQUID_TRANSPARENT=on

firewall: IPSEC_SERVER=off

firewall: PPTP_SERVER=off

firewall: ONE_TO_ONE_NAT_MODE=type2

firewall: RULES=||0x10000002|0|113.108.21.16||

firewall: RULES=||0x10000002|0|198.199.98.246||

firewall: RULES=Deluge||0x00000001|6||58846|

firewall: RULES=Deluge_web||0x00000001|6||8112|

firewall: RULES=FTP||0x00000001|6||20|

firewall: RULES=FTP||0x00000001|6||21|

firewall: RULES=HTTP||0x10000001|6||80|

firewall: RULES=OpenVPN||0x00000001|17||1194|

firewall: RULES=OpenVPN-TCP||0x00000001|6||1194|

firewall: RULES=PLEX_Media_Server||0x00000008|6|192.168.1.105|32400|32400

firewall: RULES=Plex_Media_Server||0x10000001|6||32400|

firewall: RULES=Serviio_HTTP||0x10000001|6||23424|

firewall: RULES=Serviio_HTTPS||0x10000001|6||23524|

firewall: RULES=Test||0x00000001|6||1000|

firewall: RULES=Transmission||0x00000001|6||51413|

firewall: RULES=Transmission||0x00000001|17||51413|

firewall: RULES=VPN_1701||0x00000001|6||1701|

firewall: RULES=VPN_1723||0x00000001|6||1723|

firewall: RULES=VPN_443||0x10000001|6||443|

firewall: RULES=VPN_4500||0x00000001|17||4500|

firewall: RULES=VPN_500||0x00000001|17||500|

firewall: RULES=||0x10000008|6|192.168.1.105|63156|63156

firewall: RULES=||0x10000008|17|192.168.1.105|63156|63156

firewall: RULES=||0x10000008|6|192.168.1.105|9091|9091

firewall: RULES=||0x10000008|17|192.168.1.105|9091|9091

firewall: RULES=||0x10000002|0|116.31.116.44||

firewall: RULES=ssh_server||0x00000001|6||22|

firewall: RULES=webconfig||0x10000001|6||81|

firewall: FW_DROP=DROP

firewall: FW_ACCEPT=ACCEPT

firewall: IPBIN=/sbin/ip

firewall: TCBIN=/sbin/tc

firewall: MODPROBE=/sbin/modprobe

firewall: RMMOD=/sbin/rmmod

firewall: SYSCTL=/sbin/sysctl

firewall: IFCONFIG=/sbin/ifconfig

firewall: PPTP_PASSTHROUGH_FORCE=no

firewall: EGRESS_FILTERING=off

firewall: Detected WAN role for interface: enp9s0

firewall: Detected LAN role for interface: enp12s5

firewall: Setting kernel parameters

firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh1=1024 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh2=4096 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.neigh.default.gc_thresh3=8192 >/dev/null = 0

sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_max: No such file or directory

firewall: /sbin/sysctl -w net.netfilter.nf_conntrack_max=524288 >/dev/null = 65280

firewall: /sbin/sysctl -w net.ipv4.ip_forward=1 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.tcp_syncookies=1 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.all.log_martians=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.all.accept_redirects=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.all.send_redirects=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.default.accept_redirects=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.default.send_redirects=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.conf.all.accept_source_route=0 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1 >/dev/null = 0

firewall: /sbin/sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1 >/dev/null = 0

firewall: Detected WAN info - enp9s0 192.168.178.2 on network 192.168.178.0/24

firewall: Detected LAN info - enp12s5 192.168.1.1 on network 192.168.1.0/24

firewall: Using gateway mode

firewall: Loading kernel modules

firewall: /sbin/modprobe ipt_LOG >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ipt_REJECT >/dev/null 2>&1 = 256

firewall: /sbin/modprobe nf_conntrack_ipv4 >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_set >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_conntrack_ftp >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_conntrack_irc >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ppp_generic >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ppp_mppe >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_conntrack_proto_gre >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_conntrack_pptp >/dev/null 2>&1 = 256

firewall: Loading kernel modules for NAT

firewall: /sbin/modprobe ipt_MASQUERADE >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_ftp >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_irc >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_proto_gre >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_pptp >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_h323 >/dev/null 2>&1 = 256

firewall: /sbin/modprobe ip_nat_tftp >/dev/null 2>&1 = 256

firewall: Setting default policy to DROP

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:207: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:209: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:207: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:209: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:207: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:209: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:212: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:213: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:214: Invalid table: filter

firewall: Defining custom chains

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:255: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:259: Invalid table: filter

firewall: Running blocked external rules

firewall: Blocking external host: 113.108.21.16

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:776: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:777: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:778: Invalid table: filter

firewall: Blocking external host: 198.199.98.246

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:776: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:777: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:778: Invalid table: filter

firewall: Blocking external host: 116.31.116.44

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:776: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:777: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:778: Invalid table: filter

firewall: Running custom rules

firewall: Running common rules

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:404: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:405: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:407: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:412: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:437: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:438: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:441: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:442: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:443: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:444: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:455: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:456: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:526: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:527: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:528: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:529: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:530: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:537: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:538: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:539: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:540: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:552: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:553: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:554: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:557: Invalid table: mangle

firewall: Running incoming denied rules

firewall: Running user-defined incoming rules

firewall: Allowing incoming tcp port/range 80

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Allowing incoming tcp port/range 32400

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Allowing incoming tcp port/range 23424

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Allowing incoming tcp port/range 23524

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Allowing incoming tcp port/range 443

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Allowing incoming tcp port/range 81

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:623: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:624: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:632: Invalid table: nat

firewall: Running default incoming allowed rules

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:573: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:574: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:576: Invalid table: filter

firewall: Running user-defined port forward rules

firewall: Port forwarding tcp 63156 to 192.168.1.105 63156

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:943: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:953: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:962: Invalid table: filter

firewall: Port forwarding udp 63156 to 192.168.1.105 63156

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:943: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:953: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:962: Invalid table: filter

firewall: Port forwarding tcp 9091 to 192.168.1.105 9091

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:943: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:953: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:962: Invalid table: filter

firewall: Port forwarding udp 9091 to 192.168.1.105 9091

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:943: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:953: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:962: Invalid table: filter

firewall: /sbin/rmmod imq 2>/dev/null = 256

firewall: /sbin/rmmod ifb 2>/dev/null = 256

firewall: /sbin/rmmod act_mirred 2>/dev/null = 256

firewall: /sbin/tc qdisc del dev enp9s0 root >/dev/null 2>&1 = 512

firewall: /sbin/tc qdisc del dev enp9s0 ingress >/dev/null 2>&1 = 512

firewall: Running 1-to-1 NAT rules

firewall: Running user-defined proxy rules

firewall: Content filter is offline

firewall: Web proxy is online

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:1147: Invalid table: nat

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:1154: Invalid table: nat

firewall: Enabled proxy transparent mode

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:1197: Invalid table: nat

firewall: Running multipath

firewall: /sbin/ip rule | grep -Ev '(local|main|default)' | while read PRIO RULE; do /sbin/ip rule del prio ${PRIO%%:*} 2>/dev/null; done = 0

firewall: /sbin/ip rule | grep -Ev '(local|main|default)' | while read PRIO RULE; do /sbin/ip rule del $RULE prio ${PRIO%%:*} 2>/dev/null; done = 0

firewall: /sbin/ip route flush table 50 = 0

firewall: /sbin/ip route flush table 250 = 0

firewall: /sbin/ip route flush cache = 0

firewall: Running Masquerading

firewall: Enabling NAT on WAN interface enp9s0

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:2389: Invalid table: nat

firewall: Running user-defined outgoing block rules

firewall: Running default forwarding rules

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:2411: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:2423: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:2424: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:2429: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:3088: Invalid table: filter

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:3088: Invalid table: mangle

firewall: Error: /usr/clearos/apps/firewall/deploy/firewall.lua:3088: Invalid table: nat

firewall: Execution time: 0.334s

firewall: Running firewall panic mode...

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `mangle': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `mangle': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

iptables v1.4.21: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)

Perhaps iptables or your kernel needs to be upgraded.

The contents of /etc/clearos/network.conf:

# Network mode

MODE="gateway"



# Network interface roles

EXTIF="enp9s0"

LANIF="enp12s5"

DMZIF=""

HOTIF=""



# Domain and Internet Hostname

DEFAULT_DOMAIN="<domain.com>"

INTERNET_HOSTNAME="<domain.com>"



# Extra LANS

EXTRALANS=""



# ISP Maximum Speeds

ENP9S0_MAX_DOWNSTREAM=40000

ENP9S0_MAX_UPSTREAM=4000

The contents of /etc/clearos/firewall.conf:

###############################################################################

#

# Use the web-based administration tool to change the firewall configuration.

#

###############################################################################



# Squid configuration

#--------------------



SQUID_TRANSPARENT="on"



# VPN configuration

#------------------



IPSEC_SERVER="off"

PPTP_SERVER="off"



# Egress mode

#------------



EGRESS_FILTERING="off"



# Webconfig rules

#----------------

# WARNING:

# The firewall script will not perform further validation on the rules below.

# Use the web-based administration tool to change the firewall configuration.

#

# Name|Group|Flags|Protocol|Address|Port|Parameter

#

# -Name and Group are symbolic names which only have meaning within the

#  web-based administration tool (webconfig).

# -Flags are OR combined to produce a 4-byte bitmask.  This needs to be

#  explained in full detail somewhere.  Reading the source to IsValidFlags()

#  within the firewallrule.class file is the best documentation about this

#  at the moment.

# -Protocol is an integer ID listed in /etc/protocols.

# -Address is an IPv4, IPv6, or MAC/HW address depending on the rule's flags.

# -Port is a TCP/UDP service address depending on the rule's flags and

#  protocol.

# -Parameter can contain additional rule criteria depending on the rule's

#  flags and/or protocol.

#

# NOTE: If editing these by hand, do not add spaces between fields.

RULES="\<This is to sensitive to post online>

"



# vim: ts=4 syntax=sh

Thanks in advance,

John

Very strange because it is barfing at a routine to delete all chains and from then on. Can you try starting the firewall in debug mode with a "firewall-start -d" and post the output. Also can you post the contents of /etc/clearos/network.conf and /etc/clearos/firewall.conf?