Forums

Resolved
0 votes
We are looking into some firewall gateway software options to replace our current servers.

Out currect gateway has two wan nics and 3 lan nics with a complex firewall traffic is being routed between networks.
I believe this is really easy to recreate using clearos. however we are looking for another feature.

Both our internet connections have more then one outside ipaddress.
One is a x.x.x.x/24 block and the other is a /28 block

I cannot put the router into bridging.
One way to do this is create a lot of wan adresses but it must be easier to create an interface accepting a whole subnet
Thursday, January 09 2014, 11:52 AM
Share this post:
Responses (1)
  • Accepted Answer

    Friday, January 10 2014, 03:03 PM - #Permalink
    Resolved
    0 votes
    I have tried to configure DMZ but i seem to be unable to get it to work..
    my current config
    dns 193.x.x.1, 193.x.x.3

    eth0 = external ipaddress 193.x.x.190 gateway 193.x.x.2
    eth1 = dmz ipaddress 193.x.x.192 netmask 255.255.255.224

    eth0 and eth1 are seperate vlans endpointed in esx.

    I also have a server in the vlan of eth1 with ip 193.x.x.193 i need to connect to on port 80 from the outside world
    The reply is currently minimized Show
Your Reply