Forums

Resolved
0 votes
Fresh installation of the latest ClearOS version (community, internal server); hardwarde: supermicro server, 2xRJ45 (eno0, eno1) and 4xRJ45 network card, only eno1 is connected to the network (UP) and assigned address 192.168.7.23.
Using a browser on another computer, I go through the wizard's steps and get an error message: "Connection failed: Failed to connect to 52.6.150.76: Network is unreachable"
In the attachment there is a screenshot.
Has anyone encountered such a problem?
Attachments:
Thursday, March 10 2022, 08:16 AM
Share this post:
Responses (2)
  • Accepted Answer

    Wednesday, March 16 2022, 11:31 AM - #Permalink
    Resolved
    0 votes
    Is your interface closest to the network defined as External? it needs to be, even if it is on your LAN. As another thought, are you behind an upstream proxy? If so, you need to enter the proxy settings in the IP Settings screen.
    The reply is currently minimized Show
  • Accepted Answer

    Sunday, March 20 2022, 11:31 AM - #Permalink
    Resolved
    0 votes
    You hit the point. Thank you very much for help.

    How the problem arose:
    1. Configuration was doing by a web browser from another network computer - i.e. the network "works well",
    2. The computer has many network cards (x6), only one card was up, but it was not the "first" interface: eno0,
    3. Installer for "Privete server mode" - all network interfaces should be in the local network by default,
    4. The network configurator displayed the interfaces as in the attachment, automatically assigning the roles=EXTERNAL to the disabled port (?). But the network works fine - see point 1. ;)

    In this situation, the laconic message about the network configuration did not arouse my vigilance, and the problem that appeared at the next stage was difficult for me to associate with this configuration step.

    Thanks again for your help.
    Attachments:
    The reply is currently minimized Show
Your Reply